sonido en tcos

[des_cfn000]

Colegio Julián Besteiro. Móstoles
Tenemos varios pc's antiguos conectados a un servidor con TCOS. El resultado es excelente; en algunos momentos se pierde el sonido y hay que reiniciar para recuperarlo. ¿Qué puede estar ocurriendo?
Gracias.

[des_mariodebian]

Cuando algo ocurre, normalmente tiene una causa que si se consigue reproducir se puede investigar el origen del error...

¿Os pasa cuando ejecutáis algo concreto?
¿Cuando arrancan equipos nuevos?
¿Se pierde el sonido en todos a la vez?

[des_cfn000]

Mario, gracias por interesarte tan pronto.
El sonido se corta de forma independiente en cada una de las terminales: he encendido dos terminales y he abierto el navegador Mozilla en la página de Fantasmín que tiene sonido; al cabo de unos minutos se ha cortado el sonido.
Inmediatamente he encendido otro terminal y me he conectado a la misma página y a los pocos minutos se ha cortado también; he reiniciado y he abierto un juego con sonido, a los dos minutos se ha cortado.
Al hacer clic en el icono del sonido, aparece una ventana que dice: esperando a que responda el sistema de sonido.
Carlos Fernández.

[des_cfn000]

Mario:
Me parece que la cosa se complica. Hay unos diez ordenadores iguales (los de la antigua aula de informática de CESEIN) y en todos se va el sonido al cabo de unos segundos o varios minutos de estar conectados; sin embargo en el único ordenador de otro modelo (tanto o más antiguo) que se ha conectado no ha ocurrido. Tengo que instalar algún otro modelo de ordenador para ver qué ocurre, pero da la impresión que fuera alguna incompatibilidad con ese modelo de tarjeta de sonido.
Carlos Fernández.

[des_mariodebian]

Necesito que te conectes por SSH a uno de los terminales ligeros y me pases la salida de estos comandos:

Código: Seleccionar todo

dmesg
ps

[des_ezequiel]

Perdona cfn000.

Voy a usar este hilo para indicar el mismo tipo de problema con una clase "tcosera" en MAX 5. El comportamiento que describes es muy parecido al que le está ocurriendo a mi aula. Funciona muy bien salvo el audio que hasta ahora no había necesitado. Si, por ejemplo, ven unvídeo en youtube al cabo de un rato (entre 20 segundos y un minuto) se corta el audio.

Así que me uno a ti.

Los deberes para mañana ya están puestos.

Thanks

[des_ezequiel]

Entrada editada.

El comentario anterior no ofrecía información válida. En cuanto pueda hago lo que me pides Mario.

Gracias


La información de los equipos es está:

ps
PID TTY TIME CMD
16198 pts/1 00:00:00 bash
16643 pts/1 00:00:00 ps

Pulseaudio cuando funciona

Estadísticas de PulseAudio:
• Actualmente en uso: 1 blocks containing 64.0 KiB bytes total.
• Asignado durante ejecución: 7181 blocks containing 66.1 MiB bytes total.
• Tamaño de la caché: 0 B
• Nombre de usuario: root
• Nombre del equipo: equipo06
• Nombre del servidor: pulseaudio
• Versión del servidor pulseaudio: 0.9.14
• Especificación de la muestra: s16le 2ch 44100Hz
• Salida de audio por defecto: alsa_output.front_0
• Entrada de audio por defecto: alsa_input.front_0
• Cookie: da158b75

Normalmente los equipos pierden el sonido al cabo de un rato pero no al unísono. Logicamente TCOS informa que pulseaudio ha dejado de funcionar.

Las pruebas se han hecho con youtube y http://www.roalddahl.com. Son exigentes en recursos. ¿Sería conveniente instalar squid en el servidor para que además de tener la cache de DNS haya cache de páginas? Los profesores de inglés trabajan en sus clases con la misma página web todo el rato.

[des_mariodebian]

Sin abrir el navegador web, buscad alguna aplicación "que haga ruido" e intentáis que el sonido casque.

Si no lo conseguiis el problema es de FlashPlayer no de TCOS.

Ezequiel, la salida de los comandos del terminal ligero no del servidor.

[des_cfn000]

Mario:
He probado, sin abrir el navegador, otro programa (Math, o algo así, no recuerdo) y se ha cortado también el sonido.
Lo antes posible te enviaré la salida que nos has pedido.
un saludo

Carlos Fernández, Colegio Julián Besteiro.

[des_ezequiel]

Bueno, ya me he conectado por ssh:

dmesg

9000-0x9fff]
[ 0.762069] pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[ 0.762075] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7a00000-0xdfafffff]
[ 0.762124] pci 0000:02:05.0: reg 10 32bit mmio: [0xdfeff000-0xdfefffff]
[ 0.762133] pci 0000:02:05.0: reg 14 io port: [0xac00-0xac3f]
[ 0.762142] pci 0000:02:05.0: reg 18 32bit mmio: [0xdfec0000-0xdfedffff]
[ 0.762166] pci 0000:02:05.0: reg 30 32bit mmio: [0xdfee0000-0xdfeeffff]
[ 0.762178] pci 0000:02:05.0: supports D1 D2
[ 0.762182] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.762187] pci 0000:02:05.0: PME# disabled
[ 0.762232] pci 0000:00:1e.0: transparent bridge
[ 0.762239] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
[ 0.762245] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.762252] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xdfb00000-0xdfbfffff]
[ 0.762266] bus 00 -> node 0
[ 0.762278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.762498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[ 0.765664] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.765842] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.766014] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.766260] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.766433] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.766607] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.766781] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.767021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.767175] ACPI: Power Resource [URP1] (off)
[ 0.767231] ACPI: Power Resource [URP2] (off)
[ 0.767285] ACPI: Power Resource [FDDP] (off)
[ 0.767342] ACPI: Power Resource [LPTP] (off)
[ 0.767466] ACPI: WMI: Mapper loaded
[ 0.767858] SCSI subsystem initialized
[ 0.767947] libata version 3.00 loaded.
[ 0.768074] usbcore: registered new interface driver usbfs
[ 0.768110] usbcore: registered new interface driver hub
[ 0.768170] usbcore: registered new device driver usb
[ 0.768398] PCI: Using ACPI for IRQ routing
[ 0.768542] Bluetooth: Core ver 2.13
[ 0.768542] NET: Registered protocol family 31
[ 0.768542] Bluetooth: HCI device and connection manager initialized
[ 0.768542] Bluetooth: HCI socket layer initialized
[ 0.768542] NET: Registered protocol family 8
[ 0.768542] NET: Registered protocol family 20
[ 0.768542] NetLabel: Initializing
[ 0.768542] NetLabel: domain hash size = 128
[ 0.768542] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.768542] NetLabel: unlabeled traffic allowed by default
[ 0.768542] AppArmor: AppArmor Filesystem Enabled
[ 0.768542] pnp: PnP ACPI init
[ 0.768542] ACPI: bus type pnp registered
[ 0.774408] pnp: PnP ACPI: found 13 devices
[ 0.774413] ACPI: ACPI bus type pnp unregistered
[ 0.774423] PnPBIOS: Disabled by ACPI PNP
[ 0.809296] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.809302] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.809309] pci 0000:00:01.0: MEM window: 0xdfd00000-0xdfdfffff
[ 0.809315] pci 0000:00:01.0: PREFETCH window: 0x000000d7a00000-0x000000dfafffff
[ 0.809326] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.809331] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.809338] pci 0000:00:1e.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.809344] pci 0000:00:1e.0: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff
[ 0.809367] pci 0000:00:1e.0: setting latency timer to 64
[ 0.809374] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.809377] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.809381] bus: 01 index 0 io port: [0x9000-0x9fff]
[ 0.809385] bus: 01 index 1 mmio: [0xdfd00000-0xdfdfffff]
[ 0.809389] bus: 01 index 2 mmio: [0xd7a00000-0xdfafffff]
[ 0.809392] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.809395] bus: 02 index 0 io port: [0xa000-0xafff]
[ 0.809398] bus: 02 index 1 mmio: [0xdfe00000-0xdfefffff]
[ 0.809401] bus: 02 index 2 mmio: [0xdfb00000-0xdfbfffff]
[ 0.809404] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.809407] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[ 0.809426] NET: Registered protocol family 2
[ 0.809646] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.810025] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.810087] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.810146] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.810150] TCP reno registered
[ 0.810335] NET: Registered protocol family 1
[ 0.810566] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.323557] it is
[ 1.904117] Freeing initrd memory: 8036k freed
[ 1.904243] cpufreq: No nForce2 chipset.
[ 1.904500] audit: initializing netlink socket (disabled)
[ 1.904534] type=2000 audit(1023309046.904:1): initialized
[ 1.914215] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.916356] VFS: Disk quotas dquot_6.5.1
[ 1.916474] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.917614] fuse init (API version 7.10)
[ 1.917778] msgmni has been set to 489
[ 1.918145] alg: No test for stdrng (krng)
[ 1.918172] io scheduler noop registered
[ 1.918176] io scheduler anticipatory registered
[ 1.918179] io scheduler deadline registered
[ 1.918232] io scheduler cfq registered (default)
[ 1.918297] pci 0000:01:00.0: Boot video device
[ 1.923198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.923217] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.923416] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.923421] ACPI: Power Button (FF) [PWRF]
[ 1.923491] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.923496] ACPI: Power Button (CM) [PWRB]
[ 1.923583] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.923593] ACPI: Sleep Button (CM) [SLPB]
[ 1.923867] processor ACPI_CPU:00: registered as cooling_device0
[ 1.923874] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.926950] isapnp: Scanning for PnP cards...
[ 2.280824] isapnp: No Plug & Play device found
[ 2.283414] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.283529] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.283650] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.284162] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.284336] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.285609] brd: module loaded
[ 2.286179] loop: module loaded
[ 2.286363] Fixed MDIO Bus: probed
[ 2.286374] PPP generic driver version 2.4.2
[ 2.286491] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 2.286556] Driver 'sd' needs updating - please use bus_type methods
[ 2.286574] Driver 'sr' needs updating - please use bus_type methods
[ 2.286700] ata_piix 0000:00:1f.1: version 2.12
[ 2.286797] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.286991] scsi0 : ata_piix
[ 2.287187] scsi1 : ata_piix
[ 2.288888] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.288894] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.452505] ata1.00: ATA-5: MAXTOR 6L040J2, A93.0500, max UDMA/133
[ 2.452510] ata1.00: 78177792 sectors, multi 16: LBA
[ 2.468449] ata1.00: configured for UDMA/100
[ 2.624179] ata2.01: NODEV after polling detection
[ 2.632319] ata2.00: ATAPI: RW-321248 1.00 20020308, 1.00, max UDMA/33
[ 2.648290] ata2.00: configured for UDMA/33
[ 2.649542] scsi 0:0:0:0: Direct-Access ATA MAXTOR 6L040J2 A93. PQ: 0 ANSI: 5
[ 2.649747] sd 0:0:0:0: [sda] 78177792 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.649775] sd 0:0:0:0: [sda] Write Protect is off
[ 2.649780] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.649823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.649947] sd 0:0:0:0: [sda] 78177792 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 2.649972] sd 0:0:0:0: [sda] Write Protect is off
[ 2.649976] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.650020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.650027] sda: sda1 sda2
[ 2.655216] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.655314] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.656808] scsi 1:0:0:0: CD-ROM RW-321248 1.00 PQ: 0 ANSI: 5
[ 2.659834] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.659841] Uniform CD-ROM driver Revision: 3.20
[ 2.660070] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.660167] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.661206] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.661240] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.661264] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.661349] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.661363] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 2.661368] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 2.661498] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 2.661544] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000d000
[ 2.661704] usb usb1: configuration #1 chosen from 1 choice
[ 2.661762] hub 1-0:1.0: USB hub found
[ 2.661780] hub 1-0:1.0: 2 ports detected
[ 2.661967] uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.661981] uhci_hcd 0000:00:1f.4: setting latency timer to 64
[ 2.661986] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 2.662090] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 2.662134] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000d400
[ 2.662274] usb usb2: configuration #1 chosen from 1 choice
[ 2.662322] hub 2-0:1.0: USB hub found
[ 2.662340] hub 2-0:1.0: 2 ports detected
[ 2.662595] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.664662] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.664672] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.664902] mice: PS/2 mouse device common for all mice
[ 2.665179] rtc_cmos 00:02: RTC can wake from S4
[ 2.665253] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.665284] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 2.665431] device-mapper: uevent: version 1.0.3
[ 2.665669] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.665769] device-mapper: multipath: version 1.0.5 loaded
[ 2.665775] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.665953] EISA: Probing bus 0 at eisa.0
[ 2.665997] EISA: Detected 0 cards.
[ 2.666064] cpuidle: using governor ladder
[ 2.666068] cpuidle: using governor menu
[ 2.666950] TCP cubic registered
[ 2.667090] NET: Registered protocol family 10
[ 2.667734] lo: Disabled Privacy Extensions
[ 2.668290] NET: Registered protocol family 17
[ 2.668341] Bluetooth: L2CAP ver 2.11
[ 2.668344] Bluetooth: L2CAP socket layer initialized
[ 2.668349] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.668352] Bluetooth: SCO socket layer initialized
[ 2.668439] Bluetooth: RFCOMM socket layer initialized
[ 2.668460] Bluetooth: RFCOMM TTY layer initialized
[ 2.668463] Bluetooth: RFCOMM ver 1.10
[ 2.668566] Using IPI No-Shortcut mode
[ 2.668760] registered taskstats version 1
[ 2.668899] Magic number: 6:972:547
[ 2.669030] rtc_cmos 00:02: setting system clock to 2002-06-05 20:30:48 UTC (1023309048)
[ 2.669035] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.669039] EDD information not available.
[ 2.670007] Freeing unused kernel memory: 532k freed
[ 2.670187] Write protecting the kernel text: 4120k
[ 2.670244] Write protecting the kernel read-only data: 1524k
[ 2.691027] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.215367] parport_pc 00:0a: reported by Plug and Play ACPI
[ 3.215482] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 3.320392] usbcore: registered new interface driver usblp
[ 3.328501] lp0: using parport0 (interrupt-driven).
[ 3.701294] Linux agpgart interface v0.103
[ 3.706720] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 3.718590] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 3.737414] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 3.737420] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.737500] e100 0000:02:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.761646] e100 0000:02:05.0: PME# disabled
[ 3.770483] e100: eth0: e100_probe: addr 0xdfeff000, irq 17, MAC addr 00:02:b3:a8:04:93
[ 3.970938] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.970966] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 4.058651] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 4.292057] intel8x0_measure_ac97_clock: measured 54924 usecs
[ 4.292063] intel8x0: clocking to 48000
[ 4.551267] psmouse serio1: ID: 10 00 64<6>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 6.635958] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 6.677647] RPC: Registered udp transport module.
[ 6.677653] RPC: Registered tcp transport module.
[ 6.772125] aufs 20080922
[ 6.873803] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.876252] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 6.885417] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.036014] eth0: no IPv6 routers present
[ 34.055412] aufs test_add:423:exe[2035]: uid/gid/perm /.usr 0/0/0755, 0/0/01777
[ 35.255956] FDC 0 is a post-1991 82077
[ 35.785118] Initializing USB Mass Storage driver...
[ 35.785188] usbcore: registered new interface driver usb-storage
[ 35.785195] USB Mass Storage support registered.
[ 48.183713] mtrr: no MTRR for d8000000,2000000 found
[ 1650.976018] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 1651.144762] usb 1-1: configuration #1 chosen from 1 choice
[ 1651.148692] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1651.150245] usb-storage: device found at 2
[ 1651.150251] usb-storage: waiting for device to settle before scanning
[ 1656.149213] usb-storage: device scan complete
[ 1656.152184] scsi 2:0:0:0: Direct-Access CCR-60 9412 PQ: 0 ANSI: 0
[ 1658.255792] sd 2:0:0:0: [sdb] 1947648 512-byte hardware sectors: (997 MB/951 MiB)
[ 1658.260779] sd 2:0:0:0: [sdb] Write Protect is off
[ 1658.260785] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1658.260788] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1658.272788] sd 2:0:0:0: [sdb] 1947648 512-byte hardware sectors: (997 MB/951 MiB)
[ 1658.277776] sd 2:0:0:0: [sdb] Write Protect is off
[ 1658.277780] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1658.277784] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1658.277792] sdb: sdb1
[ 1658.284072] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1658.284196] sd 2:0:0:0: Attached scsi generic sg2 type 0

ps

PID USER COMMAND
1 root /bin/sh /init splash
2 root [kthreadd]
3 root [migration/0]
4 root [ksoftirqd/0]
5 root [watchdog/0]
6 root [events/0]
7 root [khelper]
8 root [kstop/0]
9 root [kintegrityd/0]
10 root [kblockd/0]
11 root [kacpid]
12 root [kacpi_notify]
13 root [cqueue]
14 root [ata/0]
15 root [ata_aux]
16 root [ksuspend_usbd]
17 root [khubd]
18 root [kseriod]
19 root [kmmcd]
20 root [btaddconn]
21 root [btdelconn]
22 root [pdflush]
23 root [pdflush]
24 root [kswapd0]
25 root [aio/0]
26 root [ecryptfs-kthrea]
29 root [scsi_eh_0]
30 root [scsi_eh_1]
31 root [kstriped]
32 root [kmpathd/0]
33 root [kmpath_handlerd]
34 root [ksnapd]
35 root [kondemand/0]
36 root [krfcommd]
157 root /sbin/udevd --daemon --resolve-names=never
190 root syslogd
343 root [kpsmoused]
1237 root [rpciod/0]
1242 root [nfsiod]
1260 root [aufsd]
1261 root [aufsd]
1263 root [aufsd]
1269 root [aufsd]
1490 root dhclient eth0
1574 daemon /sbin/portmap
1972 root [loop0]
2154 root /usr/sbin/acpid -c /etc/acpi
2360 root /bin/sh /sbin/tryXorg --server=10.0.0.254 --xorgopts= -auth /roo
2369 root Xorg vt7 -auth /root/.Xauthority -query 10.0.0.254
2472 root ltspfsd
2505 root dropbear -p 22 -E -d /etc/dropbear/dropbear_dss_host_key -r /etc
2599 root pulseaudio --no-cpu-limit --log-target=stderr --resample-method=
2653 root /bin/sh /usr/sbin/listener-daemon.sh
2654 root /usr/sbin/mount-listener /proc/mounts /tmp/proc_mounts
2684 root /usr/bin/tcosxmlrpc /etc/abyss.conf
2710 root /usr/bin/p9100d -f /dev/lp0
2711 root /bin/sh /scripts/tcos-bottom/80shell
2725 root /bin/sh /sbin/rungetty tty1
10818 root [scsi_eh_2]
10820 root [usb-storage]
11125 root ltspfsd
14905 root dropbear -p 22 -E -d /etc/dropbear/dropbear_dss_host_key -r /etc
14951 root -sh
15779 root ps

[des_ezequiel]

MAX probaturas:

He abierto con el reproductor de medios un .avi. A los pocos segundos a devuelto el siguiente mensaje:

Error de totem

Pantallazo.png (10.48 KiB) Visto 9886 veces

Luego he comprobado que en ese terminal el audio seguía funcionando escuchando en youtube a Led Zeppelin, corazonzito heavy que tiene uno. Antes de que se fuese el audio he probado a abrir el avi con VLC y ¡¡¡CRASH!!! total. Casi instantáneamente se ha cerrado y el audio ha dejado de funcionar.

[des_mariodebian]

El dmesg es normal y en la salida de ps se ve pulseaudio... ¿ después de cascar se sigue viendo el proceso pulseaudio? ¿pone algo en dmesg después de cascar?

[des_ezequiel]

El ps creo que es después de cascar pulseaudio.

El dmesg no lo recuerdo.

Intentaré repetir las pruebas.

[des_cfn000]

Envío los datos después y antes de irse el sonido.
Gracias
Después de perderse el sonido.

[ 0.164489] domain 0: span 0-1 level MC
[ 0.164491] groups: 0 1
[ 0.164496] CPU1 attaching sched-domain:
[ 0.164498] domain 0: span 0-1 level MC
[ 0.164500] groups: 1 0
[ 0.164553] devtmpfs: initialized
[ 0.164553] regulator: core version 0.5
[ 0.164553] Time: 11:08:12 Date: 02/15/11
[ 0.164553] NET: Registered protocol family 16
[ 0.164553] Trying to unpack rootfs image as initramfs...
[ 0.164553] EISA bus registered
[ 0.164553] ACPI: bus type pci registered
[ 0.164553] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164553] PCI: Not using MMCONFIG.
[ 0.164553] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.164553] PCI: Using configuration type 1 for base access
[ 0.172293] bio: create slab <bio-0> at 0
[ 0.172783] ACPI: EC: Look up EC in DSDT
[ 0.176782] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.180631] ACPI: Interpreter enabled
[ 0.180635] ACPI: (supports S0 S3 S4 S5)
[ 0.180652] ACPI: Using IOAPIC for interrupt routing
[ 0.180694] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.186267] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.186269] PCI: Using MMCONFIG for extended config space
[ 0.193887] ACPI Warning: Incorrect checksum in table [OEMB] - 55, should be 50 (20090903/tbutils-314)
[ 0.194689] ACPI: No dock devices found.
[ 0.194940] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.195039] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.195042] pci 0000:00:01.0: PME# disabled
[ 0.195098] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff]
[ 0.195136] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.195139] pci 0000:00:1b.0: PME# disabled
[ 0.195198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.195202] pci 0000:00:1c.0: PME# disabled
[ 0.195247] pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
[ 0.195291] pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
[ 0.195334] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.195378] pci 0000:00:1d.3: reg 20 io port: [0xd480-0xd49f]
[ 0.195428] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffbc00-0xf9ffbfff]
[ 0.195475] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.195479] pci 0000:00:1d.7: PME# disabled
[ 0.195591] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.195595] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.195598] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.195637] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.195643] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.195650] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.195655] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.195661] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.195698] pci 0000:00:1f.2: reg 10 io port: [0xd400-0xd407]
[ 0.195704] pci 0000:00:1f.2: reg 14 io port: [0xd080-0xd083]
[ 0.195709] pci 0000:00:1f.2: reg 18 io port: [0xd000-0xd007]
[ 0.195714] pci 0000:00:1f.2: reg 1c io port: [0xcc00-0xcc03]
[ 0.195719] pci 0000:00:1f.2: reg 20 io port: [0xc880-0xc88f]
[ 0.195740] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.195743] pci 0000:00:1f.2: PME# disabled
[ 0.195784] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.195832] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.195840] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.195848] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.195853] pci 0000:01:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.195858] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff]
[ 0.195916] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.195919] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfeafffff]
[ 0.195923] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.195976] pci 0000:02:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]
[ 0.196017] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfeba0000-0xfebbffff]
[ 0.196052] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.196056] pci 0000:02:00.0: PME# disabled
[ 0.196104] pci 0000:00:1c.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.196151] pci 0000:00:1e.0: transparent bridge
[ 0.196169] pci_bus 0000:00: on NUMA node 0
[ 0.196172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.196257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.196325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.202938] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.203028] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.203117] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.203204] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.203291] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.203380] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.203468] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.203556] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.203659] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203661] vgaarb: loaded
[ 0.203762] SCSI subsystem initialized
[ 0.203842] libata version 3.00 loaded.
[ 0.203900] usbcore: registered new interface driver usbfs
[ 0.203910] usbcore: registered new interface driver hub
[ 0.203929] usbcore: registered new device driver usb
[ 0.204065] ACPI: WMI: Mapper loaded
[ 0.204065] PCI: Using ACPI for IRQ routing
[ 0.204174] NetLabel: Initializing
[ 0.204176] NetLabel: domain hash size = 128
[ 0.204177] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.204187] NetLabel: unlabeled traffic allowed by default
[ 0.204212] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.204216] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.208062] Switching to clocksource tsc
[ 0.209717] AppArmor: AppArmor Filesystem Enabled
[ 0.209730] pnp: PnP ACPI init
[ 0.209745] ACPI: bus type pnp registered
[ 0.214654] pnp: PnP ACPI: found 18 devices
[ 0.214657] ACPI: ACPI bus type pnp unregistered
[ 0.214659] PnPBIOS: Disabled by ACPI PNP
[ 0.214671] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.214679] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.214681] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.214683] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 0.214686] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 0.214693] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.214695] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 0.214697] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 0.214700] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.214702] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.214707] system 00:0e: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.214712] system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.214714] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.214718] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.214723] system 00:11: iomem range 0x0-0x9ffff could not be reserved
[ 0.214725] system 00:11: iomem range 0xc0000-0xcffff could not be reserved
[ 0.214728] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
[ 0.214730] system 00:11: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.249411] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.249414] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.249418] pci 0000:00:01.0: MEM window: 0xfa000000-0xfeafffff
[ 0.249421] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.249425] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.249427] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.249432] pci 0000:00:1c.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.249435] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.249441] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.249442] pci 0000:00:1e.0: IO window: disabled
[ 0.249446] pci 0000:00:1e.0: MEM window: disabled
[ 0.249449] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.249465] alloc irq_desc for 16 on node -1
[ 0.249467] alloc kstat_irqs on node -1
[ 0.249473] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249477] pci 0000:00:01.0: setting latency timer to 64
[ 0.249483] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.249487] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249491] pci 0000:00:1c.0: setting latency timer to 64
[ 0.249496] pci 0000:00:1e.0: setting latency timer to 64
[ 0.249500] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.249502] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.249504] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.249506] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff]
[ 0.249508] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.249510] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.249512] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.249514] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.249516] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.249518] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.249555] NET: Registered protocol family 2
[ 0.249642] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.249910] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.250357] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.250563] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.250566] TCP reno registered
[ 0.250657] NET: Registered protocol family 1
[ 0.250763] pci 0000:01:00.0: Boot video device
[ 0.250923] cpufreq-nforce2: No nForce2 chipset.
[ 0.250948] Scanning for low memory corruption every 60 seconds
[ 0.251035] audit: initializing netlink socket (disabled)
[ 0.251046] type=2000 audit(1297768091.247:1): initialized
[ 0.259228] highmem bounce pool size: 64 pages
[ 0.259232] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.260391] VFS: Disk quotas dquot_6.5.2
[ 0.260437] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.260902] fuse init (API version 7.13)
[ 0.260968] msgmni has been set to 1621
[ 0.261147] alg: No test for stdrng (krng)
[ 0.261190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.261192] io scheduler noop registered
[ 0.261193] io scheduler anticipatory registered
[ 0.261195] io scheduler deadline registered
[ 0.261224] io scheduler cfq registered (default)
[ 0.261340] alloc irq_desc for 24 on node -1
[ 0.261342] alloc kstat_irqs on node -1
[ 0.261349] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.261355] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.261436] alloc irq_desc for 25 on node -1
[ 0.261437] alloc kstat_irqs on node -1
[ 0.261443] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.261450] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.261517] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.261533] Firmware did not grant requested _OSC control
[ 0.261559] Firmware did not grant requested _OSC control
[ 0.261570] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.261654] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.261662] ACPI: Power Button [PWRB]
[ 0.261697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.261699] ACPI: Power Button [PWRF]
[ 0.261924] processor LNXCPU:00: registered as cooling_device0
[ 0.261951] processor LNXCPU:01: registered as cooling_device1
[ 0.265816] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.265822] ACPI: Thermal Zone [THRM] (30 C)
[ 0.266048] isapnp: Scanning for PnP cards...
[ 0.267018] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.267108] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.267391] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.268330] brd: module loaded
[ 0.268701] loop: module loaded
[ 0.268765] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.268855] ata_piix 0000:00:1f.1: version 2.13
[ 0.268865] alloc irq_desc for 18 on node -1
[ 0.268867] alloc kstat_irqs on node -1
[ 0.268872] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.268903] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.268959] scsi0 : ata_piix
[ 0.269014] scsi1 : ata_piix
[ 0.269925] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.269928] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.269943] alloc irq_desc for 19 on node -1
[ 0.269945] alloc kstat_irqs on node -1
[ 0.269948] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.269952] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.269979] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.270014] scsi2 : ata_piix
[ 0.270053] scsi3 : ata_piix
[ 0.271110] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
[ 0.271112] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
[ 0.271365] Fixed MDIO Bus: probed
[ 0.271393] PPP generic driver version 2.4.2
[ 0.271417] tun: Universal TUN/TAP device driver, 1.6
[ 0.271419] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.271489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.271503] alloc irq_desc for 23 on node -1
[ 0.271504] alloc kstat_irqs on node -1
[ 0.271508] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.271517] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.271520] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.271548] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.271563] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.271573] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.275469] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.275481] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[ 0.287963] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.288072] usb usb1: configuration #1 chosen from 1 choice
[ 0.288096] hub 1-0:1.0: USB hub found
[ 0.288104] hub 1-0:1.0: 8 ports detected
[ 0.288165] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.288179] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.288216] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.288223] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.288226] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.288253] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.288275] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[ 0.288342] usb usb2: configuration #1 chosen from 1 choice
[ 0.288362] hub 2-0:1.0: USB hub found
[ 0.288367] hub 2-0:1.0: 2 ports detected
[ 0.288404] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.288409] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.288411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.288434] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.288454] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[ 0.288526] usb usb3: configuration #1 chosen from 1 choice
[ 0.288547] hub 3-0:1.0: USB hub found
[ 0.288554] hub 3-0:1.0: 2 ports detected
[ 0.288586] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.288592] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.288594] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.288617] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.288644] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 0.288708] usb usb4: configuration #1 chosen from 1 choice
[ 0.288728] hub 4-0:1.0: USB hub found
[ 0.288733] hub 4-0:1.0: 2 ports detected
[ 0.288766] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.288770] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.288773] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.288796] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.288821] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
[ 0.288890] usb usb5: configuration #1 chosen from 1 choice
[ 0.288909] hub 5-0:1.0: USB hub found
[ 0.288914] hub 5-0:1.0: 2 ports detected
[ 0.288993] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.289314] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.289319] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.289378] mice: PS/2 mouse device common for all mice
[ 0.289459] rtc_cmos 00:03: RTC can wake from S4
[ 0.289488] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.289510] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.289589] device-mapper: uevent: version 1.0.3
[ 0.305984] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.323127] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.333078] Freeing initrd memory: 7861k freed
[ 0.336459] device-mapper: multipath: version 1.1.0 loaded
[ 0.336464] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.336654] EISA: Probing bus 0 at eisa.0
[ 0.336661] Cannot allocate resource for EISA slot 1
[ 0.336681] EISA: Detected 0 cards.
[ 0.336741] cpuidle: using governor ladder
[ 0.336743] cpuidle: using governor menu
[ 0.337082] TCP cubic registered
[ 0.337202] NET: Registered protocol family 10
[ 0.337589] lo: Disabled Privacy Extensions
[ 0.337854] NET: Registered protocol family 17
[ 0.337910] Using IPI No-Shortcut mode
[ 0.337986] PM: Resume from disk failed.
[ 0.338000] registered taskstats version 1
[ 0.338228] Magic number: 15:331:125
[ 0.338279] acpi device:00: hash matches
[ 0.338305] rtc_cmos 00:03: setting system clock to 2011-02-15 11:08:12 UTC (1297768092)
[ 0.338308] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.338309] EDD information not available.
[ 0.432224] ata4.01: NODEV after polling detection
[ 0.444195] ata4.00: ATAPI: Optiarc DVD RW AD-7203S, 1.06, max UDMA/100
[ 0.444333] ata3.00: ATA-8: ST3500418AS, CC35, max UDMA/133
[ 0.444335] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.496961] ata4.00: configured for UDMA/100
[ 0.497304] ata3.00: configured for UDMA/133
[ 0.623890] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 0.627399] isapnp: No Plug & Play device found
[ 0.627525] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC35 PQ: 0 ANSI: 5
[ 0.627621] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.627634] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.627658] sd 2:0:0:0: [sda] Write Protect is off
[ 0.627660] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.627758] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.627880] sda:
[ 0.629345] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7203S 1.06 PQ: 0 ANSI: 5
[ 0.632961] sda1 sda2 sda3 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.634419] Uniform CD-ROM driver Revision: 3.20
[ 0.634544] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.634596] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 0.644685] sda5 > sda4
[ 0.645001] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.645013] Freeing unused kernel memory: 676k freed
[ 0.645348] Write protecting the kernel text: 4840k
[ 0.645408] Write protecting the kernel read-only data: 1884k
[ 0.661655] udev: starting version 151
[ 0.773674] usb 1-8: configuration #1 chosen from 1 choice
[ 0.779833] Initializing USB Mass Storage driver...
[ 0.779926] scsi4 : SCSI emulation for USB Mass Storage devices
[ 0.779997] usbcore: registered new interface driver usb-storage
[ 0.779999] USB Mass Storage support registered.
[ 0.780062] usb-storage: device found at 2
[ 0.780063] usb-storage: waiting for device to settle before scanning
[ 1.025099] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 1.025102] EXT3-fs: write access will be enabled during recovery.
[ 4.621650] kjournald starting. Commit interval 5 seconds
[ 4.621669] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 4.621678] ext3_orphan_cleanup: deleting unreferenced inode 5825044
[ 4.621731] ext3_orphan_cleanup: deleting unreferenced inode 2352901
[ 4.621757] ext3_orphan_cleanup: deleting unreferenced inode 2352900
[ 4.621765] ext3_orphan_cleanup: deleting unreferenced inode 2351113
[ 4.621770] ext3_orphan_cleanup: deleting unreferenced inode 2351112
[ 4.621775] ext3_orphan_cleanup: deleting unreferenced inode 2351111
[ 4.621779] ext3_orphan_cleanup: deleting unreferenced inode 2351110
[ 4.621784] ext3_orphan_cleanup: deleting unreferenced inode 2351109
[ 4.621788] EXT3-fs: sda2: 8 orphan inodes deleted
[ 4.621790] EXT3-fs: recovery complete.
[ 4.651953] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.776187] usb-storage: device scan complete
[ 5.782695] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 5.789175] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 5.795798] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 5.802402] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 5.802742] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5.802839] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 5.803011] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 5.803103] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 5.806848] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 5.807391] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.808144] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 5.809016] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 16.480925] Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1 across:3903752k
[ 16.594066] udev: starting version 151
[ 17.051916] type=1505 audit(1297764509.209:2): operation="profile_load" pid=574 name="/sbin/dhclient3"
[ 17.052466] type=1505 audit(1297764509.213:3): operation="profile_load" pid=574 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.052781] type=1505 audit(1297764509.213:4): operation="profile_load" pid=574 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.118506] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 17.118508] Copyright (c) 2007 Atheros Corporation.
[ 17.118550] atl2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.118557] atl2 0000:02:00.0: setting latency timer to 64
[ 17.217606] parport_pc 00:07: reported by Plug and Play ACPI
[ 17.217682] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 17.246897] ppdev: user-space parallel port driver
[ 17.268252] vga16fb: initializing
[ 17.268256] vga16fb: mapped to 0xc00a0000
[ 17.268309] fb0: VGA16 VGA frame buffer device
[ 17.274089] Linux agpgart interface v0.103
[ 17.327318] psmouse serio1: ID: 10 00 64
[ 17.440387] nvidia: module license 'NVIDIA' taints kernel.
[ 17.440391] Disabling lock debugging due to kernel taint
[ 17.942036] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 18.320018] intel_rng: FWH not detected
[ 18.322189] lp0: using parport0 (interrupt-driven).
[ 18.329259] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.329269] nvidia 0000:01:00.0: setting latency timer to 64
[ 18.329274] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.330326] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 18.658748] Console: switching to colour frame buffer device 80x30
[ 18.804627] alloc irq_desc for 26 on node -1
[ 18.804630] alloc kstat_irqs on node -1
[ 18.804642] atl2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 18.804837] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.806698] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.806727] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.880673] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 18.880821] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.596462] EXT3 FS on sda2, internal journal
[ 29.516010] eth0: no IPv6 routers present
[ 45.461457] kjournald starting. Commit interval 5 seconds
[ 45.461858] EXT3 FS on sda4, internal journal
[ 45.461866] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.351263] type=1505 audit(1297764526.378:5): operation="profile_load" pid=943 name="/usr/share/gdm/guest-session/Xsession"
[ 46.351411] type=1505 audit(1297764526.378:6): operation="profile_replace" pid=944 name="/sbin/dhclient3"
[ 46.351974] type=1505 audit(1297764526.378:7): operation="profile_replace" pid=944 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 46.352284] type=1505 audit(1297764526.382:8): operation="profile_replace" pid=944 name="/usr/lib/connman/scripts/dhclient-script"
[ 46.354951] type=1505 audit(1297764526.382:9): operation="profile_load" pid=947 name="/usr/bin/freshclam"
[ 46.357735] type=1505 audit(1297764526.386:10): operation="profile_load" pid=948 name="/usr/lib/cups/backend/cups-pdf"
[ 46.358421] type=1505 audit(1297764526.386:11): operation="profile_load" pid=948 name="/usr/sbin/cupsd"
[ 46.358475] type=1505 audit(1297764526.386:12): operation="profile_load" pid=945 name="/usr/bin/evince"
[ 46.361149] type=1505 audit(1297764526.390:13): operation="profile_load" pid=949 name="/usr/sbin/dhcpd3"
[ 46.363117] type=1505 audit(1297764526.390:14): operation="profile_load" pid=950 name="/usr/sbin/mysqld"
[ 47.865632] apm: BIOS not found.
[ 49.353484] RPC: Registered udp transport module.
[ 49.353487] RPC: Registered tcp transport module.
[ 49.353489] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 49.400058] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 49.447417] svc: failed to register lockdv1 RPC service (errno 97).
[ 49.448343] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 49.451717] NFSD: starting 90-second grace period
[ 49.975544] CPU0 attaching NULL sched-domain.
[ 49.975549] CPU1 attaching NULL sched-domain.
[ 50.000577] CPU0 attaching sched-domain:
[ 50.000580] domain 0: span 0-1 level MC
[ 50.000582] groups: 0 1
[ 50.000587] CPU1 attaching sched-domain:
[ 50.000589] domain 0: span 0-1 level MC
[ 50.000591] groups: 1 0
[ 649.579773] __ratelimit: 12 callbacks suppressed
[ 649.579777] indicator-sound[2300]: segfault at 8 ip 00346539 sp bf918f30 error 4 in libpulse.so.0.12.2[313000+40000]
[ 765.428574] indicator-sound[2506]: segfault at 8 ip 00143539 sp bf915c50 error 4 in libpulse.so.0.12.2[110000+40000]
[ 6975.638734] indicator-sound[3122]: segfault at 8 ip 00243539 sp bff0c780 error 4 in libpulse.so.0.12.2[210000+40000]
[87347.377094] indicator-sound[20301]: segfault at 8 ip 00a2e539 sp bf857250 error 4 in libpulse.so.0.12.2[9fb000+40000]
[534875.657630] indicator-sound[1465]: segfault at 8 ip 00947539 sp bfc0ff40 error 4 in libpulse.so.0.12.2[914000+40000]
[534976.817264] openshot[1877]: segfault at 447fc70 ip 0447fc70 sp ac3602b0 error 4 in libdbus-glib-1.so.2.1.0[44c6000+1c000]
[535157.171184] indicator-sound[1757]: segfault at 8 ip 00947539 sp bfee6920 error 4 in libpulse.so.0.12.2[914000+40000]
[537525.348503] indicator-sound[2645]: segfault at 8 ip 007b1539 sp bfa26ae0 error 4 in libpulse.so.0.12.2[77e000+40000]
aula05@ServidorMax:~$ PS
PS: orden no encontrada
aula05@ServidorMax:~$ ps
PID TTY TIME CMD
2745 pts/0 00:00:00 bash
2826 pts/0 00:00:00 ps
aula05@ServidorMax:~$










































antes de perderse el sonido


[ 0.164489] domain 0: span 0-1 level MC
[ 0.164491] groups: 0 1
[ 0.164496] CPU1 attaching sched-domain:
[ 0.164498] domain 0: span 0-1 level MC
[ 0.164500] groups: 1 0
[ 0.164553] devtmpfs: initialized
[ 0.164553] regulator: core version 0.5
[ 0.164553] Time: 11:08:12 Date: 02/15/11
[ 0.164553] NET: Registered protocol family 16
[ 0.164553] Trying to unpack rootfs image as initramfs...
[ 0.164553] EISA bus registered
[ 0.164553] ACPI: bus type pci registered
[ 0.164553] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164553] PCI: Not using MMCONFIG.
[ 0.164553] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.164553] PCI: Using configuration type 1 for base access
[ 0.172293] bio: create slab <bio-0> at 0
[ 0.172783] ACPI: EC: Look up EC in DSDT
[ 0.176782] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.180631] ACPI: Interpreter enabled
[ 0.180635] ACPI: (supports S0 S3 S4 S5)
[ 0.180652] ACPI: Using IOAPIC for interrupt routing
[ 0.180694] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.186267] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.186269] PCI: Using MMCONFIG for extended config space
[ 0.193887] ACPI Warning: Incorrect checksum in table [OEMB] - 55, should be 50 (20090903/tbutils-314)
[ 0.194689] ACPI: No dock devices found.
[ 0.194940] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.195039] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.195042] pci 0000:00:01.0: PME# disabled
[ 0.195098] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff]
[ 0.195136] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.195139] pci 0000:00:1b.0: PME# disabled
[ 0.195198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.195202] pci 0000:00:1c.0: PME# disabled
[ 0.195247] pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
[ 0.195291] pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
[ 0.195334] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.195378] pci 0000:00:1d.3: reg 20 io port: [0xd480-0xd49f]
[ 0.195428] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffbc00-0xf9ffbfff]
[ 0.195475] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.195479] pci 0000:00:1d.7: PME# disabled
[ 0.195591] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.195595] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.195598] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.195637] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.195643] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.195650] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.195655] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.195661] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.195698] pci 0000:00:1f.2: reg 10 io port: [0xd400-0xd407]
[ 0.195704] pci 0000:00:1f.2: reg 14 io port: [0xd080-0xd083]
[ 0.195709] pci 0000:00:1f.2: reg 18 io port: [0xd000-0xd007]
[ 0.195714] pci 0000:00:1f.2: reg 1c io port: [0xcc00-0xcc03]
[ 0.195719] pci 0000:00:1f.2: reg 20 io port: [0xc880-0xc88f]
[ 0.195740] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.195743] pci 0000:00:1f.2: PME# disabled
[ 0.195784] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.195832] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.195840] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.195848] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.195853] pci 0000:01:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.195858] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff]
[ 0.195916] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.195919] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfeafffff]
[ 0.195923] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.195976] pci 0000:02:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]
[ 0.196017] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfeba0000-0xfebbffff]
[ 0.196052] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.196056] pci 0000:02:00.0: PME# disabled
[ 0.196104] pci 0000:00:1c.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.196151] pci 0000:00:1e.0: transparent bridge
[ 0.196169] pci_bus 0000:00: on NUMA node 0
[ 0.196172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.196257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.196325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.202938] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.203028] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.203117] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.203204] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.203291] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.203380] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.203468] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.203556] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.203659] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203661] vgaarb: loaded
[ 0.203762] SCSI subsystem initialized
[ 0.203842] libata version 3.00 loaded.
[ 0.203900] usbcore: registered new interface driver usbfs
[ 0.203910] usbcore: registered new interface driver hub
[ 0.203929] usbcore: registered new device driver usb
[ 0.204065] ACPI: WMI: Mapper loaded
[ 0.204065] PCI: Using ACPI for IRQ routing
[ 0.204174] NetLabel: Initializing
[ 0.204176] NetLabel: domain hash size = 128
[ 0.204177] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.204187] NetLabel: unlabeled traffic allowed by default
[ 0.204212] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.204216] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.208062] Switching to clocksource tsc
[ 0.209717] AppArmor: AppArmor Filesystem Enabled
[ 0.209730] pnp: PnP ACPI init
[ 0.209745] ACPI: bus type pnp registered
[ 0.214654] pnp: PnP ACPI: found 18 devices
[ 0.214657] ACPI: ACPI bus type pnp unregistered
[ 0.214659] PnPBIOS: Disabled by ACPI PNP
[ 0.214671] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.214679] system 00:0a: ioport range 0xa00-0xa0f has been reserved
[ 0.214681] system 00:0a: ioport range 0xa10-0xa1f has been reserved
[ 0.214683] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[ 0.214686] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 0.214693] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.214695] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 0.214697] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 0.214700] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.214702] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.214707] system 00:0e: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.214712] system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.214714] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.214718] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.214723] system 00:11: iomem range 0x0-0x9ffff could not be reserved
[ 0.214725] system 00:11: iomem range 0xc0000-0xcffff could not be reserved
[ 0.214728] system 00:11: iomem range 0xe0000-0xfffff could not be reserved
[ 0.214730] system 00:11: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.249411] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.249414] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.249418] pci 0000:00:01.0: MEM window: 0xfa000000-0xfeafffff
[ 0.249421] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.249425] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.249427] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.249432] pci 0000:00:1c.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.249435] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.249441] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.249442] pci 0000:00:1e.0: IO window: disabled
[ 0.249446] pci 0000:00:1e.0: MEM window: disabled
[ 0.249449] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.249465] alloc irq_desc for 16 on node -1
[ 0.249467] alloc kstat_irqs on node -1
[ 0.249473] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249477] pci 0000:00:01.0: setting latency timer to 64
[ 0.249483] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.249487] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249491] pci 0000:00:1c.0: setting latency timer to 64
[ 0.249496] pci 0000:00:1e.0: setting latency timer to 64
[ 0.249500] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.249502] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.249504] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.249506] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfeafffff]
[ 0.249508] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.249510] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.249512] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.249514] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.249516] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.249518] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.249555] NET: Registered protocol family 2
[ 0.249642] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.249910] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.250357] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.250563] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.250566] TCP reno registered
[ 0.250657] NET: Registered protocol family 1
[ 0.250763] pci 0000:01:00.0: Boot video device
[ 0.250923] cpufreq-nforce2: No nForce2 chipset.
[ 0.250948] Scanning for low memory corruption every 60 seconds
[ 0.251035] audit: initializing netlink socket (disabled)
[ 0.251046] type=2000 audit(1297768091.247:1): initialized
[ 0.259228] highmem bounce pool size: 64 pages
[ 0.259232] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.260391] VFS: Disk quotas dquot_6.5.2
[ 0.260437] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.260902] fuse init (API version 7.13)
[ 0.260968] msgmni has been set to 1621
[ 0.261147] alg: No test for stdrng (krng)
[ 0.261190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.261192] io scheduler noop registered
[ 0.261193] io scheduler anticipatory registered
[ 0.261195] io scheduler deadline registered
[ 0.261224] io scheduler cfq registered (default)
[ 0.261340] alloc irq_desc for 24 on node -1
[ 0.261342] alloc kstat_irqs on node -1
[ 0.261349] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.261355] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.261436] alloc irq_desc for 25 on node -1
[ 0.261437] alloc kstat_irqs on node -1
[ 0.261443] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.261450] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.261517] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.261533] Firmware did not grant requested _OSC control
[ 0.261559] Firmware did not grant requested _OSC control
[ 0.261570] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.261654] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.261662] ACPI: Power Button [PWRB]
[ 0.261697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.261699] ACPI: Power Button [PWRF]
[ 0.261924] processor LNXCPU:00: registered as cooling_device0
[ 0.261951] processor LNXCPU:01: registered as cooling_device1
[ 0.265816] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.265822] ACPI: Thermal Zone [THRM] (30 C)
[ 0.266048] isapnp: Scanning for PnP cards...
[ 0.267018] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.267108] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.267391] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.268330] brd: module loaded
[ 0.268701] loop: module loaded
[ 0.268765] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.268855] ata_piix 0000:00:1f.1: version 2.13
[ 0.268865] alloc irq_desc for 18 on node -1
[ 0.268867] alloc kstat_irqs on node -1
[ 0.268872] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.268903] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.268959] scsi0 : ata_piix
[ 0.269014] scsi1 : ata_piix
[ 0.269925] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.269928] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.269943] alloc irq_desc for 19 on node -1
[ 0.269945] alloc kstat_irqs on node -1
[ 0.269948] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.269952] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.269979] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.270014] scsi2 : ata_piix
[ 0.270053] scsi3 : ata_piix
[ 0.271110] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
[ 0.271112] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
[ 0.271365] Fixed MDIO Bus: probed
[ 0.271393] PPP generic driver version 2.4.2
[ 0.271417] tun: Universal TUN/TAP device driver, 1.6
[ 0.271419] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.271489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.271503] alloc irq_desc for 23 on node -1
[ 0.271504] alloc kstat_irqs on node -1
[ 0.271508] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.271517] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.271520] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.271548] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.271563] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.271573] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.275469] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.275481] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[ 0.287963] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.288072] usb usb1: configuration #1 chosen from 1 choice
[ 0.288096] hub 1-0:1.0: USB hub found
[ 0.288104] hub 1-0:1.0: 8 ports detected
[ 0.288165] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.288179] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.288216] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.288223] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.288226] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.288253] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.288275] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[ 0.288342] usb usb2: configuration #1 chosen from 1 choice
[ 0.288362] hub 2-0:1.0: USB hub found
[ 0.288367] hub 2-0:1.0: 2 ports detected
[ 0.288404] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.288409] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.288411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.288434] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.288454] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[ 0.288526] usb usb3: configuration #1 chosen from 1 choice
[ 0.288547] hub 3-0:1.0: USB hub found
[ 0.288554] hub 3-0:1.0: 2 ports detected
[ 0.288586] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.288592] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.288594] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.288617] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.288644] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 0.288708] usb usb4: configuration #1 chosen from 1 choice
[ 0.288728] hub 4-0:1.0: USB hub found
[ 0.288733] hub 4-0:1.0: 2 ports detected
[ 0.288766] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.288770] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.288773] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.288796] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.288821] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
[ 0.288890] usb usb5: configuration #1 chosen from 1 choice
[ 0.288909] hub 5-0:1.0: USB hub found
[ 0.288914] hub 5-0:1.0: 2 ports detected
[ 0.288993] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.289314] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.289319] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.289378] mice: PS/2 mouse device common for all mice
[ 0.289459] rtc_cmos 00:03: RTC can wake from S4
[ 0.289488] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.289510] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.289589] device-mapper: uevent: version 1.0.3
[ 0.305984] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.323127] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.333078] Freeing initrd memory: 7861k freed
[ 0.336459] device-mapper: multipath: version 1.1.0 loaded
[ 0.336464] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.336654] EISA: Probing bus 0 at eisa.0
[ 0.336661] Cannot allocate resource for EISA slot 1
[ 0.336681] EISA: Detected 0 cards.
[ 0.336741] cpuidle: using governor ladder
[ 0.336743] cpuidle: using governor menu
[ 0.337082] TCP cubic registered
[ 0.337202] NET: Registered protocol family 10
[ 0.337589] lo: Disabled Privacy Extensions
[ 0.337854] NET: Registered protocol family 17
[ 0.337910] Using IPI No-Shortcut mode
[ 0.337986] PM: Resume from disk failed.
[ 0.338000] registered taskstats version 1
[ 0.338228] Magic number: 15:331:125
[ 0.338279] acpi device:00: hash matches
[ 0.338305] rtc_cmos 00:03: setting system clock to 2011-02-15 11:08:12 UTC (1297768092)
[ 0.338308] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.338309] EDD information not available.
[ 0.432224] ata4.01: NODEV after polling detection
[ 0.444195] ata4.00: ATAPI: Optiarc DVD RW AD-7203S, 1.06, max UDMA/100
[ 0.444333] ata3.00: ATA-8: ST3500418AS, CC35, max UDMA/133
[ 0.444335] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.496961] ata4.00: configured for UDMA/100
[ 0.497304] ata3.00: configured for UDMA/133
[ 0.623890] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 0.627399] isapnp: No Plug & Play device found
[ 0.627525] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC35 PQ: 0 ANSI: 5
[ 0.627621] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.627634] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.627658] sd 2:0:0:0: [sda] Write Protect is off
[ 0.627660] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.627758] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.627880] sda:
[ 0.629345] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7203S 1.06 PQ: 0 ANSI: 5
[ 0.632961] sda1 sda2 sda3 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.634419] Uniform CD-ROM driver Revision: 3.20
[ 0.634544] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.634596] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 0.644685] sda5 > sda4
[ 0.645001] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.645013] Freeing unused kernel memory: 676k freed
[ 0.645348] Write protecting the kernel text: 4840k
[ 0.645408] Write protecting the kernel read-only data: 1884k
[ 0.661655] udev: starting version 151
[ 0.773674] usb 1-8: configuration #1 chosen from 1 choice
[ 0.779833] Initializing USB Mass Storage driver...
[ 0.779926] scsi4 : SCSI emulation for USB Mass Storage devices
[ 0.779997] usbcore: registered new interface driver usb-storage
[ 0.779999] USB Mass Storage support registered.
[ 0.780062] usb-storage: device found at 2
[ 0.780063] usb-storage: waiting for device to settle before scanning
[ 1.025099] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 1.025102] EXT3-fs: write access will be enabled during recovery.
[ 4.621650] kjournald starting. Commit interval 5 seconds
[ 4.621669] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 4.621678] ext3_orphan_cleanup: deleting unreferenced inode 5825044
[ 4.621731] ext3_orphan_cleanup: deleting unreferenced inode 2352901
[ 4.621757] ext3_orphan_cleanup: deleting unreferenced inode 2352900
[ 4.621765] ext3_orphan_cleanup: deleting unreferenced inode 2351113
[ 4.621770] ext3_orphan_cleanup: deleting unreferenced inode 2351112
[ 4.621775] ext3_orphan_cleanup: deleting unreferenced inode 2351111
[ 4.621779] ext3_orphan_cleanup: deleting unreferenced inode 2351110
[ 4.621784] ext3_orphan_cleanup: deleting unreferenced inode 2351109
[ 4.621788] EXT3-fs: sda2: 8 orphan inodes deleted
[ 4.621790] EXT3-fs: recovery complete.
[ 4.651953] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.776187] usb-storage: device scan complete
[ 5.782695] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 5.789175] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 5.795798] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 5.802402] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 5.802742] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5.802839] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 5.803011] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 5.803103] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 5.806848] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 5.807391] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 5.808144] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 5.809016] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 16.480925] Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1 across:3903752k
[ 16.594066] udev: starting version 151
[ 17.051916] type=1505 audit(1297764509.209:2): operation="profile_load" pid=574 name="/sbin/dhclient3"
[ 17.052466] type=1505 audit(1297764509.213:3): operation="profile_load" pid=574 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.052781] type=1505 audit(1297764509.213:4): operation="profile_load" pid=574 name="/usr/lib/connman/scripts/dhclient-script"
[ 17.118506] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 17.118508] Copyright (c) 2007 Atheros Corporation.
[ 17.118550] atl2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.118557] atl2 0000:02:00.0: setting latency timer to 64
[ 17.217606] parport_pc 00:07: reported by Plug and Play ACPI
[ 17.217682] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 17.246897] ppdev: user-space parallel port driver
[ 17.268252] vga16fb: initializing
[ 17.268256] vga16fb: mapped to 0xc00a0000
[ 17.268309] fb0: VGA16 VGA frame buffer device
[ 17.274089] Linux agpgart interface v0.103
[ 17.327318] psmouse serio1: ID: 10 00 64
[ 17.440387] nvidia: module license 'NVIDIA' taints kernel.
[ 17.440391] Disabling lock debugging due to kernel taint
[ 17.942036] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 18.320018] intel_rng: FWH not detected
[ 18.322189] lp0: using parport0 (interrupt-driven).
[ 18.329259] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.329269] nvidia 0000:01:00.0: setting latency timer to 64
[ 18.329274] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 18.330326] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 18.658748] Console: switching to colour frame buffer device 80x30
[ 18.804627] alloc irq_desc for 26 on node -1
[ 18.804630] alloc kstat_irqs on node -1
[ 18.804642] atl2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 18.804837] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.806698] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.806727] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.880673] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 18.880821] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.596462] EXT3 FS on sda2, internal journal
[ 29.516010] eth0: no IPv6 routers present
[ 45.461457] kjournald starting. Commit interval 5 seconds
[ 45.461858] EXT3 FS on sda4, internal journal
[ 45.461866] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.351263] type=1505 audit(1297764526.378:5): operation="profile_load" pid=943 name="/usr/share/gdm/guest-session/Xsession"
[ 46.351411] type=1505 audit(1297764526.378:6): operation="profile_replace" pid=944 name="/sbin/dhclient3"
[ 46.351974] type=1505 audit(1297764526.378:7): operation="profile_replace" pid=944 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 46.352284] type=1505 audit(1297764526.382:8): operation="profile_replace" pid=944 name="/usr/lib/connman/scripts/dhclient-script"
[ 46.354951] type=1505 audit(1297764526.382:9): operation="profile_load" pid=947 name="/usr/bin/freshclam"
[ 46.357735] type=1505 audit(1297764526.386:10): operation="profile_load" pid=948 name="/usr/lib/cups/backend/cups-pdf"
[ 46.358421] type=1505 audit(1297764526.386:11): operation="profile_load" pid=948 name="/usr/sbin/cupsd"
[ 46.358475] type=1505 audit(1297764526.386:12): operation="profile_load" pid=945 name="/usr/bin/evince"
[ 46.361149] type=1505 audit(1297764526.390:13): operation="profile_load" pid=949 name="/usr/sbin/dhcpd3"
[ 46.363117] type=1505 audit(1297764526.390:14): operation="profile_load" pid=950 name="/usr/sbin/mysqld"
[ 47.865632] apm: BIOS not found.
[ 49.353484] RPC: Registered udp transport module.
[ 49.353487] RPC: Registered tcp transport module.
[ 49.353489] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 49.400058] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 49.447417] svc: failed to register lockdv1 RPC service (errno 97).
[ 49.448343] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 49.451717] NFSD: starting 90-second grace period
[ 49.975544] CPU0 attaching NULL sched-domain.
[ 49.975549] CPU1 attaching NULL sched-domain.
[ 50.000577] CPU0 attaching sched-domain:
[ 50.000580] domain 0: span 0-1 level MC
[ 50.000582] groups: 0 1
[ 50.000587] CPU1 attaching sched-domain:
[ 50.000589] domain 0: span 0-1 level MC
[ 50.000591] groups: 1 0
[ 649.579773] __ratelimit: 12 callbacks suppressed
[ 649.579777] indicator-sound[2300]: segfault at 8 ip 00346539 sp bf918f30 error 4 in libpulse.so.0.12.2[313000+40000]
[ 765.428574] indicator-sound[2506]: segfault at 8 ip 00143539 sp bf915c50 error 4 in libpulse.so.0.12.2[110000+40000]
[ 6975.638734] indicator-sound[3122]: segfault at 8 ip 00243539 sp bff0c780 error 4 in libpulse.so.0.12.2[210000+40000]
[87347.377094] indicator-sound[20301]: segfault at 8 ip 00a2e539 sp bf857250 error 4 in libpulse.so.0.12.2[9fb000+40000]
[534875.657630] indicator-sound[1465]: segfault at 8 ip 00947539 sp bfc0ff40 error 4 in libpulse.so.0.12.2[914000+40000]
[534976.817264] openshot[1877]: segfault at 447fc70 ip 0447fc70 sp ac3602b0 error 4 in libdbus-glib-1.so.2.1.0[44c6000+1c000]
[535157.171184] indicator-sound[1757]: segfault at 8 ip 00947539 sp bfee6920 error 4 in libpulse.so.0.12.2[914000+40000]
[537525.348503] indicator-sound[2645]: segfault at 8 ip 007b1539 sp bfa26ae0 error 4 in libpulse.so.0.12.2[77e000+40000]
[538228.678608] indicator-sound[3331]: segfault at 8 ip 003da539 sp bfd45a30 error 4 in libpulse.so.0.12.2[3a7000+40000]
aula05@ServidorMax:~$ ps
PID TTY TIME CMD
3871 pts/0 00:00:00 bash
3902 pts/0 00:00:00 ps
aula05@ServidorMax:~$
Carlos Fernández

[des_mariodebian]

Quita el applet del panel inferior (o desinstala el paquete indicator-sound) parece que es el culpable del cuelgue.