Foros de EducaMadrid

Foros para usuarios de la Plataforma Educativa de servicios públicos para la Comunidad Educativa.
https://foros.educa.madrid.org/

cómo usar backharddi???

https://foros.educa.madrid.org/viewtopic.php?f=2&t=928

Página 1 de 1

cómo usar backharddi???

Publicado: 01 Feb 2008, 14:07
por des_ezequiel
Hola.

Fernando Lison contesto en un post de Ptrivino lo siguiente:
Sobre backharddi:
No contesté antes porque, sinceramente, no sé como es "al estilo gosht", pero bueno.
Comprendo tus reparos cuando te enfrentas al interfaz para configurar particiones arrancables con backharddi...
A través de backharddi-net sólo necesitas un ordenador que tenga instalado backharddi y los clientes con una tarjeta de red capaz de arrancar por PXE. Eso sí, por este método sólo puedes hacer imágenes del disco completo, no partición a partición.
EL proceso es:
1.- Instala backharddi-net en un ordenador
2.- Crea una partición backharddi en el mismo ordenador (o en un disco externo, por ejemplo) para que se guarden en ella las imágenes. Puedes hacerla tú mismo, sólo tiene que cumplir dos requisitos: el sistema de ficheros debe ser ext3 y la etiqueta tiene que ser "backharddi"
3.- Arranca el monitor de red de backharddi en Herramientas del Sistema.
4.- Aparece un cuadro para marcar servicios, márcalos todos y cruza los dedos, porque aquí viene la única dificultad. Si backharddi encuentra un servicio de ftp funcionando, mostrará un mensaje un poco críptico y se parará. La solución es parar a mano ese servicio y volver a lanzar el monitor de red. Si necesitas más ayuda, te lo cuento más despacio.
5.- Una vez en el monitor de red (una ventana prácticamente vacía con dos columnas).
6a.- Para crear una imagen de un ordenador. Enciende el ordenador y elige (en la BIOS o con F8 o F12 o como sea) que arranque por red, si todo va bien, llegará a una pantalla en la que dice algo así, como "Esperando comando del monitor de red".
7a.- Desde el monitor de red arrastra la MAC que aparece en la columna de la izquierda sobre la línea de la derecha donde pone Nuevo Grupo. Cuando lo hayas hecho bien, que tiene su truquillo, aparece una ventanita para decidir la acción a realizar: "Subir master" y luego se te pedirá un nombre y se guardará en la partición backharddi.
8a.- De nuevo en la ventana principal del monitor de red, pulsa sobre el grupo creado con el botón derecho y elige Lanzar grupo. Enseguida empezará a grabar la imagen de tu disco.

Para volcar imágenes tendrás que esperar un poco, porque tengo que salir...
Que es como un mini howt-to. Pero tengo hay muchos matices.
  • Hay varios servicios relacionados con ftp ¿hay que desactivarlos todos?

    Qué "truquillo"
Muchas gracias por vuestro curro.

Publicado: 01 Feb 2008, 17:03
por des_fernando.lison
Pues sí, pueden ser varios los servicios y creo que sí que hay que pararlos todos, simplemente, desde una consola haz

Código: Seleccionar todo

ps -A | ftp
que debe mostrar más o menos esos servicios, y entonces lo paro, por ejemplo, para aftpd:

Código: Seleccionar todo

sudo /etc/init.d/aftpd stop
También pueden pararse -seguramente- desde el menú Sistema -> Administración -> Servicios.
El problema es que -dependiendo de la instalación- a veces estos servicios no aparecen listados al hacer ps -A , porque no están activos, se activan por medio de un superdemonio llamado inetd, que los activa cuando recibe una petición para ellos, y los desactiva cuando acaba el tráfico.
Para complicarlo aún más, este superdemonio puede llamarse inetd, o de otras maneras, en mi caso se llama openbsd-inetd, lo paro y adelante con backharddi:

Código: Seleccionar todo

sudo /etc/init.d/openbsd-inetd stop
Saludos

Publicado: 01 Feb 2008, 23:15
por des_ezequiel
Estoy usando MAX 3.1 y ya he probado a parar los servicios desde el escritorio gráfico en sistema > servicios.

Lo he hecho uno a uno y luego todos. Pero sigue dando el mismo mensaje.

Publicado: 02 Feb 2008, 08:59
por des_fernando.lison
¿No has probado a parar openbsd-inetd?

Publicado: 04 Feb 2008, 12:34
por des_ezequiel
He probado la opción:

ps -A | ftp

y no salia nada. He añadido grep pero tampoco. Así que me he ido directamente a

sudo /etc/init.d/aftpd stop

Y perfecto. Backharddi ha pasado a la siguiente pantalla. Ahí esperaba una opción para generar una imagen y no hay tal opción. Pero ya he llegado hasta aquí.

Reinicio y en grub selecciono Sistema de backup. Tras varios pasos llego hasta el particionado de mi disco. Intento marcar la partición donde está MAX 31.

Aparentemente no hace nada. Cliqueo dos veces y entra en una pantalla que dice que defina la acción. Pero solo hay:

No hacer nada

Se termino de definir la partición.

Continuo seleccionando realizar las acciones indicadas y se reinicia.

Y no pasa nada de nada.

Publicado: 05 Feb 2008, 12:56
por des_OCampos
No estas usando correctamente ni el monitor ni el cliente.

http://backharddi.ideseneca.es para leer una escueta pero util documentacion.

La interfaz del cliente de Backharddi es como la interfaz del debian instaler, cuando te dice "No hacer nada" eso es precisamente la opción que hay configurada en ese momento, haz doble click en ella para iterar sobre las diferentes opciones.

Para generar imagenes con el Monitor, primero has de iniciar las maquinas cliente para que arranquen por PXE, una vez arranquen te saldrán en el menu de la izquierda, arrastralas hacia el Label "Nuevo Grupo" y podras configurar las opciones que necesites.

Publicado: 05 Feb 2008, 18:38
por des_ezequiel
Gracias Ocampos.

Sigo avanzando pero la cosa no termina de funcionar.

He creado un Cd de arranque de backharddi.

He conseguido generar una imagen en un disco portatil USB que es mi disco backharddi.

Desde otro equipo he iniciado con el cd y solictado restaurar la copia. Ha tardado una buena cantidad de minutos en que realizase el estudio del particionado del disco del cliente. La partición a clonar venía marcad con un asterisco. Y he conseguido iniciar el proceso. Al poco rato se ha parado indicándome que ha fallado el sistema de backup :cry:

Intento en otro Pc el procedimemiento por red. Y llago hasta lanzar el proceso con el grupo (1 solo PC) y termina al poco dando error. En el cliente dice que ha fallado el sistema backharddi y en el servidor pone un simple error. :cry:

Otra ayudita que voy acercándome.

Publicado: 06 Feb 2008, 11:19
por des_OCampos
Cuando el cliente da un error puedes acceder a una consola del BusyBox pulsando alt+f2 (por ejemplo), en /var/log/ tienes varios logs del sistema de masterizado si incluyeras la información que hay en ellos, me sería mucho más sencillo identificar el problema y darte una solución.

Saludos.

Publicado: 06 Feb 2008, 13:10
por des_ezequiel
Gracias de nuevo.

Antes de leer tu respuesta ya había repetido la imagen del PC master.

Usando el método del disco de arranque y la opción backharddi HD he conseguido "clonar" el equipo en un cliente.

Tiempo de análisis de particiones: 2 minutos. Me parece algo lento.
Tiempo de restauración 4 minutos. Rapidísimo. Con partimage tardo justo el doble.

Usaré el log en cuanto vuelva a tener problemas que los tendré por dos razones:

-Por que quiero restaurar por red y

-Por que mi aula tiene PCs distintos. Y 10 que deberían ser iguales resulta que no y un par de ellos tienen distinta BIOS y otras pequeñas diferencias que me están volviendo loco.

Un abrazo y gracias.

Publicado: 18 Feb 2008, 12:34
por des_ezequiel
Tengo un sabor agridulce con backharddi.

Ya he conseguido acostumbrarme a como se deben hacer los pasos para crear imágenes y restaurar imagenes. Por este lado, creo que falta en cada ventana texto autoexplicatitivo de lo que hay que hacer.

He conseguido tras mucho esfuerzo dos imagenes de una memoria usb de 2 GB que tienen dos particiones fat16. Una con portableapps y la otra con nanomax.

He descubierto que los discos o memorias a clonar sea exactamente iguales. Con partimage eso no era necesario.

He empezado a clonar la memoria USB a otras exactamente iguales. A partir de la tercera clonación la cosa ha empezado a fallar. Primero me ha salido un criptico mensaje que no puedo repetir porque con el disgusato se me pasó hacer una copia. El caso es que lo solucione colocando el disco de backup de backharddi que es un portatil USB de 160 GB y la memoria USB a clonar en los mismos puertos físicos que en los que realice la copia backup.

Ahora, cuando hace el clonado comineza siempre con la partición activa (la de nanomax) y cuando pasa hacer la segunda siempre falla. Pulso ctrl+alt+F2 para entrar en la consola y hago

cd /var/log

ls

y aparecen los ficheros de log syslog, partman y partimage.stats cuyo contenido es (y perdón por ocupar tanto):

Código: Seleccionar todo

Feb 18 10:46:11 syslogd started: BusyBox v1.1.3
Feb 18 10:46:11 kernel: klogd started: BusyBox v1.1.3 (Debian 1:1.1.3-4)
Feb 18 10:46:11 kernel: Linux version 2.6.22-2-486 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 Thu Aug 30 23:45:36 UTC 2007
Feb 18 10:46:11 kernel: BIOS-provided physical RAM map:
Feb 18 10:46:11 kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 18 10:46:11 kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 18 10:46:11 kernel:  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
Feb 18 10:46:11 kernel:  BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
Feb 18 10:46:11 kernel:  BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
Feb 18 10:46:11 kernel:  BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
Feb 18 10:46:11 kernel:  BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
Feb 18 10:46:11 kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 18 10:46:11 kernel:  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Feb 18 10:46:11 kernel: 511MB LOWMEM available.
Feb 18 10:46:11 kernel: found SMP MP-table at 000ff780
Feb 18 10:46:11 kernel: Entering add_active_range(0, 0, 130992) 0 entries of 256 used
Feb 18 10:46:11 kernel: Zone PFN ranges:
Feb 18 10:46:11 kernel:   DMA             0 ->     4096
Feb 18 10:46:11 kernel:   Normal       4096 ->   130992
Feb 18 10:46:11 kernel: early_node_map[1] active PFN ranges
Feb 18 10:46:11 kernel:     0:        0 ->   130992
Feb 18 10:46:11 kernel: On node 0 totalpages: 130992
Feb 18 10:46:11 kernel:   DMA zone: 32 pages used for memmap
Feb 18 10:46:11 kernel:   DMA zone: 0 pages reserved
Feb 18 10:46:11 kernel:   DMA zone: 4064 pages, LIFO batch:0
Feb 18 10:46:11 kernel:   Normal zone: 991 pages used for memmap
Feb 18 10:46:11 kernel:   Normal zone: 125905 pages, LIFO batch:31
Feb 18 10:46:11 kernel: DMI 2.3 present.
Feb 18 10:46:11 kernel: ACPI: RSDP 000F7C80, 0014 (r0 ACPIAM)
Feb 18 10:46:11 kernel: ACPI: RSDT 1FFB0000, 0034 (r1 A M I  OEMRSDT  12000521 MSFT       97)
Feb 18 10:46:11 kernel: ACPI: FACP 1FFB0200, 0084 (r2 A M I  OEMFACP  12000521 MSFT       97)
Feb 18 10:46:11 kernel: ACPI: DSDT 1FFB0450, 3CF4 (r1  75D8P 75D8P004        4 INTL  2002026)
Feb 18 10:46:11 kernel: ACPI: FACS 1FFC0000, 0040
Feb 18 10:46:11 kernel: ACPI: APIC 1FFB0390, 0078 (r1 A M I  OEMAPIC  12000521 MSFT       97)
Feb 18 10:46:11 kernel: ACPI: MCFG 1FFB0410, 003C (r1 A M I  OEMMCFG  12000521 MSFT       97)
Feb 18 10:46:11 kernel: ACPI: OEMB 1FFC0040, 0046 (r1 A M I  AMI_OEM  12000521 MSFT       97)
Feb 18 10:46:11 kernel: ACPI: PM-Timer IO Port: 0x808
Feb 18 10:46:11 kernel: ACPI: Local APIC address 0xfee00000
Feb 18 10:46:11 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Feb 18 10:46:11 kernel: Processor #0 15:4 APIC version 20
Feb 18 10:46:11 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Feb 18 10:46:11 kernel: Processor #1 15:4 APIC version 20
Feb 18 10:46:11 kernel: WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
Feb 18 10:46:11 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Feb 18 10:46:11 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Feb 18 10:46:11 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Feb 18 10:46:11 kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Feb 18 10:46:11 kernel: ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
Feb 18 10:46:11 kernel: IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
Feb 18 10:46:11 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 18 10:46:11 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Feb 18 10:46:11 kernel: ACPI: IRQ0 used by override.
Feb 18 10:46:11 kernel: ACPI: IRQ2 used by override.
Feb 18 10:46:11 kernel: ACPI: IRQ9 used by override.
Feb 18 10:46:11 kernel: Enabling APIC mode:  Flat.  Using 2 I/O APICs
Feb 18 10:46:11 kernel: Using ACPI (MADT) for SMP configuration information
Feb 18 10:46:11 kernel: Allocating PCI resources starting at 30000000 (gap: 20000000:dee00000)
Feb 18 10:46:11 kernel: Built 1 zonelists.  Total pages: 129969
Feb 18 10:46:11 kernel: Kernel command line: video=vesa:ywrap,mtrr vga=788 locale=es_ES console-keymaps-at/keymap=es quiet backharddi/medio=hd-media --
Feb 18 10:46:11 kernel: mapped APIC to ffffd000 (fee00000)
Feb 18 10:46:11 kernel: mapped IOAPIC to ffffc000 (fec00000)
Feb 18 10:46:11 kernel: mapped IOAPIC to ffffb000 (fecc0000)
Feb 18 10:46:11 kernel: Enabling fast FPU save and restore... done.
Feb 18 10:46:11 kernel: Enabling unmasked SIMD FPU exception support... done.
Feb 18 10:46:11 kernel: Initializing CPU#0
Feb 18 10:46:11 kernel: PID hash table entries: 2048 (order: 11, 8192 bytes)
Feb 18 10:46:11 kernel: Detected 2992.737 MHz processor.
Feb 18 10:46:11 kernel: Console: colour dummy device 80x25
Feb 18 10:46:11 kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Feb 18 10:46:11 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 18 10:46:11 kernel: Memory: 499376k/523968k available (1657k kernel code, 23916k reserved, 649k data, 316k init, 0k highmem)
Feb 18 10:46:11 kernel: virtual kernel memory layout:
Feb 18 10:46:11 kernel:     fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
Feb 18 10:46:11 kernel:     vmalloc : 0xe0800000 - 0xfffb3000   ( 503 MB)
Feb 18 10:46:11 kernel:     lowmem  : 0xc0000000 - 0xdffb0000   ( 511 MB)
Feb 18 10:46:11 kernel:       .init : 0xc0344000 - 0xc0393000   ( 316 kB)
Feb 18 10:46:11 kernel:       .data : 0xc029e5db - 0xc0340cc4   ( 649 kB)
Feb 18 10:46:11 kernel:       .text : 0xc0100000 - 0xc029e5db   (1657 kB)
Feb 18 10:46:11 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb 18 10:46:11 kernel: ating delay using timer specific routine.. 5992.97 BogoMIPS (lpj=11985955)
Feb 18 10:46:11 kernel: Security Framework v1.0.0 initialized
Feb 18 10:46:11 kernel: SELinux:  Disabled at boot.
Feb 18 10:46:11 kernel: Capability LSM initialized
Feb 18 10:46:11 kernel: Mount-cache hash table entries: 512
Feb 18 10:46:11 kernel: CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
Feb 18 10:46:11 kernel: monitor/mwait feature present.
Feb 18 10:46:11 kernel: using mwait in idle threads.
Feb 18 10:46:11 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Feb 18 10:46:11 kernel: CPU: L2 cache: 2048K
Feb 18 10:46:11 kernel: CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000649d 00000000 00000000
Feb 18 10:46:11 kernel: Compat vDSO mapped to ffffe000.
Feb 18 10:46:11 kernel: CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Feb 18 10:46:11 kernel: Checking 'hlt' instruction... OK.
Feb 18 10:46:11 kernel: ACPI: Core revision 20070126
Feb 18 10:46:11 kernel: ENABLING IO-APIC IRQs
Feb 18 10:46:11 kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 18 10:46:11 kernel: Booting paravirtualized kernel on bare hardware
Feb 18 10:46:11 kernel: NET: Registered protocol family 16
Feb 18 10:46:11 kernel: EISA bus registered
Feb 18 10:46:11 kernel: ACPI: bus type pci registered
Feb 18 10:46:11 kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Feb 18 10:46:11 kernel: PCI: Not using MMCONFIG.
Feb 18 10:46:11 kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
Feb 18 10:46:11 kernel: PCI: Using configuration type 1
Feb 18 10:46:11 kernel: Setting up standard PCI resources
Feb 18 10:46:11 kernel: ACPI: Interpreter enabled
Feb 18 10:46:11 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Feb 18 10:46:11 kernel: ACPI: Using IOAPIC for interrupt routing
Feb 18 10:46:11 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 18 10:46:11 kernel: PCI: Probing PCI hardware (bus 00)
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Feb 18 10:46:11 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 18 10:46:11 kernel: pnp: PnP ACPI init
Feb 18 10:46:11 kernel: ACPI: bus type pnp registered
Feb 18 10:46:11 kernel: pnp: PnP ACPI: found 16 devices
Feb 18 10:46:11 kernel: ACPI: ACPI bus type pnp unregistered
Feb 18 10:46:11 kernel: PnPBIOS: Disabled by ACPI PNP
Feb 18 10:46:11 kernel: PCI: Using ACPI for IRQ routing
Feb 18 10:46:11 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Feb 18 10:46:11 kernel: NET: Registered protocol family 8
Feb 18 10:46:11 kernel: NET: Registered protocol family 20
Feb 18 10:46:11 kernel: ACPI: RTC can wake from S4
Feb 18 10:46:11 kernel: pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
Feb 18 10:46:11 kernel: pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
Feb 18 10:46:11 kernel: pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
Feb 18 10:46:11 kernel: pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
Feb 18 10:46:11 kernel: pnp: 00:0f: iomem range 0xc0000-0xcffff could not be reserved
Feb 18 10:46:11 kernel: pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
Feb 18 10:46:11 kernel: pnp: 00:0f: iomem range 0x100000-0x1fffffff could not be reserved
Feb 18 10:46:11 kernel: Time: tsc clocksource has been installed.
Feb 18 10:46:11 kernel: PCI: Bridge: 0000:00:01.0
Feb 18 10:46:11 kernel:   IO window: disabled.
Feb 18 10:46:11 kernel:   MEM window: disabled.
Feb 18 10:46:11 kernel:   PREFETCH window: disabled.
Feb 18 10:46:11 kernel: PCI: Bridge: 0000:00:02.0
Feb 18 10:46:11 kernel:   IO window: disabled.
Feb 18 10:46:11 kernel:   MEM window: f3e00000-f7efffff
Feb 18 10:46:11 kernel:   PREFETCH window: bff00000-dfefffff
Feb 18 10:46:11 kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
Feb 18 10:46:11 kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Feb 18 10:46:11 kernel: NET: Registered protocol family 2
Feb 18 10:46:11 kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Feb 18 10:46:11 kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Feb 18 10:46:11 kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Feb 18 10:46:11 kernel: TCP: Hash tables configured (established 16384 bind 16384)
Feb 18 10:46:11 kernel: TCP reno registered
Feb 18 10:46:11 kernel: checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
Feb 18 10:46:11 kernel:  it is
Feb 18 10:46:11 kernel: Freeing initrd memory: 16521k freed
Feb 18 10:46:11 kernel: audit: initializing netlink socket (disabled)
Feb 18 10:46:11 kernel: audit(1203331567.192:1): initialized
Feb 18 10:46:11 kernel: VFS: Disk quotas dquot_6.5.1
Feb 18 10:46:11 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 18 10:46:11 kernel: ed
Feb 18 10:46:11 kernel: io scheduler anticipatory registered
Feb 18 10:46:11 kernel: io scheduler deadline registered
Feb 18 10:46:11 kernel: io scheduler cfq registered (default)
Feb 18 10:46:11 kernel: PCI: VIA PCI bridge detected. Disabling DAC.
Feb 18 10:46:11 kernel: PCI: Bypassing VIA 8237 APIC De-Assert Message
Feb 18 10:46:11 kernel: Boot video device is 0000:02:00.0
Feb 18 10:46:11 kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64
Feb 18 10:46:11 kernel: assign_interrupt_mode Found MSI capability
Feb 18 10:46:11 kernel: Allocate Port Service[0000:00:02.0:pcie00]
Feb 18 10:46:11 kernel: Allocate Port Service[0000:00:02.0:pcie02]
Feb 18 10:46:11 kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 1875k, total 131072k
Feb 18 10:46:11 kernel: vesafb: mode is 800x600x16, linelength=1600, pages=2
Feb 18 10:46:11 kernel: vesafb: protected mode interface info at c000:d390
Feb 18 10:46:11 kernel: vesafb: pmi: set display start = c00cd3c6, set palette = c00cd430
Feb 18 10:46:11 kernel: vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
Feb 18 10:46:11 kernel: vesafb: scrolling: redraw
Feb 18 10:46:11 kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Feb 18 10:46:11 kernel: Console: switching to colour frame buffer device 100x37
Feb 18 10:46:11 kernel: fb0: VESA VGA frame buffer device
Feb 18 10:46:11 kernel: isapnp: Scanning for PnP cards...
Feb 18 10:46:11 kernel: isapnp: No Plug & Play device found
Feb 18 10:46:11 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 18 10:46:11 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 18 10:46:11 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 18 10:46:11 kernel: 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 18 10:46:11 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Feb 18 10:46:11 kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Feb 18 10:46:11 kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Feb 18 10:46:11 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 18 10:46:11 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 18 10:46:11 kernel: mice: PS/2 mouse device common for all mice
Feb 18 10:46:11 kernel: EISA: Probing bus 0 at eisa.0
Feb 18 10:46:11 kernel: EISA: Detected 0 cards.
Feb 18 10:46:11 kernel: TCP bic registered
Feb 18 10:46:11 kernel: NET: Registered protocol family 1
Feb 18 10:46:11 kernel: NET: Registered protocol family 17
Feb 18 10:46:11 kernel: Using IPI Shortcut mode
Feb 18 10:46:11 kernel: Freeing unused kernel memory: 316k freed
Feb 18 10:46:11 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Feb 18 10:46:11 kernel: SCSI subsystem initialized
Feb 18 10:46:11 kernel: libata version 2.21 loaded.
Feb 18 10:46:11 kernel: sata_via 0000:00:0f.0: version 2.2
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 17
Feb 18 10:46:11 kernel: sata_via 0000:00:0f.0: routed to hard irq line 11
Feb 18 10:46:11 kernel: scsi0 : sata_via
Feb 18 10:46:11 kernel: scsi1 : sata_via
Feb 18 10:46:11 kernel: ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 17
Feb 18 10:46:11 kernel: ata2: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 17
Feb 18 10:46:11 kernel: usbcore: registered new interface driver usbfs
Feb 18 10:46:11 kernel: usbcore: registered new interface driver hub
Feb 18 10:46:11 kernel: usbcore: registered new device driver usb
Feb 18 10:46:11 kernel: USB Universal Host Controller Interface driver v3.0
Feb 18 10:46:11 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 18 10:46:11 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 18 10:46:11 kernel: via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Feb 18 10:46:11 kernel: parport_pc 00:07: reported by Plug and Play ACPI
Feb 18 10:46:11 kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Feb 18 10:46:11 kernel: ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Feb 18 10:46:11 kernel: ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.0: irq 18, io base 0x0000dc00
Feb 18 10:46:11 kernel: usb usb1: configuration #1 chosen from 1 choice
Feb 18 10:46:11 kernel: hub 1-0:1.0: USB hub found
Feb 18 10:46:11 kernel: hub 1-0:1.0: 2 ports detected
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 18
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.1: irq 18, io base 0x0000d080
Feb 18 10:46:11 kernel: usb usb2: configuration #1 chosen from 1 choice
Feb 18 10:46:11 kernel: hub 2-0:1.0: USB hub found
Feb 18 10:46:11 kernel: hub 2-0:1.0: 2 ports detected
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.2: irq 18, io base 0x0000d000
Feb 18 10:46:11 kernel: usb usb3: configuration #1 chosen from 1 choice
Feb 18 10:46:11 kernel: hub 3-0:1.0: USB hub found
Feb 18 10:46:11 kernel: 
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 18
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Feb 18 10:46:11 kernel: uhci_hcd 0000:00:10.3: irq 18, io base 0x0000ef00
Feb 18 10:46:11 kernel: usb usb4: configuration #1 chosen from 1 choice
Feb 18 10:46:11 kernel: hub 4-0:1.0: USB hub found
Feb 18 10:46:11 kernel: hub 4-0:1.0: 2 ports detected
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 18
Feb 18 10:46:11 kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller
Feb 18 10:46:11 kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Feb 18 10:46:11 kernel: ehci_hcd 0000:00:10.4: irq 18, io mem 0xf7fff800
Feb 18 10:46:11 kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Feb 18 10:46:11 kernel: usb usb5: configuration #1 chosen from 1 choice
Feb 18 10:46:11 kernel: hub 5-0:1.0: USB hub found
Feb 18 10:46:11 kernel: hub 5-0:1.0: 8 ports detected
Feb 18 10:46:11 kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.1
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 17
Feb 18 10:46:11 kernel: VP_IDE: chipset revision 6
Feb 18 10:46:11 kernel: VP_IDE: not 100% native mode: will probe irqs later
Feb 18 10:46:11 kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
Feb 18 10:46:11 kernel:     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
Feb 18 10:46:11 kernel:     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
Feb 18 10:46:11 kernel: Probing IDE interface ide0...
Feb 18 10:46:11 kernel: hda: ST3160021A, ATA DISK drive
Feb 18 10:46:11 kernel: hdb: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
Feb 18 10:46:11 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 18 10:46:11 kernel: Probing IDE interface ide1...
Feb 18 10:46:11 kernel: usb 5-7: new high speed USB device using ehci_hcd and address 3
Feb 18 10:46:11 kernel: usb 5-7: configuration #1 chosen from 1 choice
Feb 18 10:46:11 kernel: Initializing USB Mass Storage driver...
Feb 18 10:46:11 kernel: usb 5-8: new high speed USB device using ehci_hcd and address 4
Feb 18 10:46:11 kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 19
Feb 18 10:46:11 kernel: eth0: VIA Rhine II at 0x1d800, 00:13:8f:84:c2:7e, IRQ 19.
Feb 18 10:46:11 kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Feb 18 10:46:11 kernel: hda: max request size: 512KiB
Feb 18 10:46:11 kernel: hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
Feb 18 10:46:11 kernel: hda: cache flushes supported
Feb 18 10:46:11 kernel:  hda: hda1 hda2 hda3 <<6>usb 5-8: configuration #1 chosen from 1 choice
Feb 18 10:46:11 kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Feb 18 10:46:11 kernel: usb-storage: device found at 3
Feb 18 10:46:11 kernel: usb-storage: waiting for device to settle before scanning
Feb 18 10:46:11 kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Feb 18 10:46:11 kernel: usbcore: registered new interface driver usb-storage
Feb 18 10:46:11 kernel: USB Mass Storage support registered.
Feb 18 10:46:11 kernel: usb-storage: device found at 4
Feb 18 10:46:11 kernel: usb-storage: waiting for device to settle before scanning
Feb 18 10:46:11 kernel:  hda5 hda6 hda7 >
Feb 18 10:46:11 kernel: hdb: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
Feb 18 10:46:11 kernel: Uniform CD-ROM driver Revision: 3.20
Feb 18 10:46:11 kernel: usb 2-2: new low speed USB device using uhci_hcd and address 2
Feb 18 10:46:11 kernel: usb 2-2: configuration #1 chosen from 1 choice
Feb 18 10:46:11 kernel: usbcore: registered new interface driver hiddev
Feb 18 10:46:11 kernel: input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
Feb 18 10:46:11 kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2
Feb 18 10:46:11 kernel: usbcore: registered new interface driver usbhid
Feb 18 10:46:11 kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Feb 18 10:46:12 kernel: usbcore: registered new interface driver usbserial
Feb 18 10:46:12 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Feb 18 10:46:12 kernel: usbcore: registered new interface driver usbserial_generic
Feb 18 10:46:12 kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Feb 18 10:46:12 kernel: vga16fb: initializing
Feb 18 10:46:12 kernel: vga16fb: mapped to 0xc00a0000
Feb 18 10:46:12 kernel: fb1: VGA16 VGA frame buffer device
Feb 18 10:46:12 init: Starting pid 1262, console /dev/vc/1: '/sbin/debian-installer'
Feb 18 10:46:12 init: Starting pid 1270, console /dev/vc/4: '/usr/bin/tail'
Feb 18 10:46:14 debconf: Setting debconf/language to en
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libbz2-1.0): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libslang2-udeb): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libstdc++6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (liblzo1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: INFO: Menu item 'localechooser' selected 
Feb 18 10:46:14 debconf: Setting debconf/language to en
Feb 18 10:46:14 localechooser: info: Locale has been preseeded to es_ES
Feb 18 10:46:14 localechooser: info: Set languagechooser/language-name = 'Spanish'
Feb 18 10:46:14 localechooser: info: Set countrychooser/shortlist-es = 'ES'
Feb 18 10:46:14 localechooser: info: Set debian-installer/locale = 'es_ES'
Feb 18 10:46:14 localechooser: info: LANGNAME=Spanish
Feb 18 10:46:14 localechooser: info: line=Spanish;1;es;ES;es_ES.UTF-8;;kbd=lat0-sun16(utf8)
Feb 18 10:46:14 localechooser: info: Set debian-installer/language = 'es'
Feb 18 10:46:14 localechooser: info: Set debian-installer/locale = 'es_ES.UTF-8'
Feb 18 10:46:14 localechooser: info: Set debian-installer/fallbacklocale = 'es_ES.UTF-8'
Feb 18 10:46:14 localechooser: info: Set debian-installer/country = 'ES'
Feb 18 10:46:14 localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Feb 18 10:46:14 debconf: Setting debconf/language to es
Feb 18 10:46:14 localechooser: info: Set debconf/language = 'es'
Feb 18 10:46:14 gtk-set-font: Switching to font 'DejaVu Sans' for 'es'
Feb 18 10:46:14 localechooser: info: Set countrychooser/country-name = 'Spain'
Feb 18 10:46:14 localechooser: info: Set debian-installer/country = 'ES'
Feb 18 10:46:14 localechooser: info: Set debian-installer/locale = 'es_ES.UTF-8'
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libbz2-1.0): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libslang2-udeb): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libstdc++6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (liblzo1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: INFO: Menu item 'kbd-chooser' selected 
Feb 18 10:46:14 main-menu[1349]: INFO: Falling back to the package description for console-keymaps-at 
Feb 18 10:46:14 main-menu[1349]: INFO: Falling back to the package description for console-keymaps-at 
Feb 18 10:46:14 kbd-chooser[1918]: DEBUG: Mounting usbdevfs to look for kbd  
Feb 18 10:46:14 kbd-chooser[1918]: DEBUG: Parsing /proc/bus/usb/devices  
Feb 18 10:46:14 kbd-chooser[1918]: DEBUG: Adding generic entry for AT keymaps  
Feb 18 10:46:14 kbd-chooser[1918]: INFO: keyboard type at: present: true:    
Feb 18 10:46:14 kbd-chooser[1918]: INFO: keyboard type at: present: unknown    
Feb 18 10:46:14 kbd-chooser[1918]: INFO: Setting debian-installer/serial-console to false 
Feb 18 10:46:14 kbd-chooser[1918]: INFO: Setting debian-installer/uml-console to false 
Feb 18 10:46:14 kbd-chooser[1918]: INFO: kbd-chooser: arch at selected 
Feb 18 10:46:14 kbd-chooser[1918]: INFO: choose_keymap: keymap = es 
Feb 18 10:46:14 kbd-chooser[1918]: INFO: kbd_chooser: setting keymap es 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libbz2-1.0): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libslang2-udeb): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libstdc++6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (liblzo1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: INFO: Menu item 'cdrom-detect' selected 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libbz2-1.0): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libslang2-udeb): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libstdc++6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (liblzo1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: INFO: Menu item 'ethdetect' selected 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libbz2-1.0): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libslang2-udeb): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libstdc++6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (liblzo1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: INFO: Menu item 'netcfg' selected 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libbz2-1.0): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libslang2-udeb): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (libstdc++6): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: DEBUG: resolver (liblzo1): package doesn't exist (ignored) 
Feb 18 10:46:14 main-menu[1349]: INFO: Menu item 'disk-detect' selected 
Feb 18 10:46:15 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Feb 18 10:46:15 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Feb 18 10:46:15 kernel: usb-storage: device scan complete
Feb 18 10:46:15 kernel: usb-storage: device scan complete
Feb 18 10:46:15 kernel: scsi 3:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
Feb 18 10:46:15 kernel: scsi 2:0:0:0: Direct-Access     Hitachi  HTS541616J9AT00  A70H PQ: 0 ANSI: 2 CCS
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] 3928064 512-byte hardware sectors (2011 MB)
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] Write Protect is off
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
Feb 18 10:46:15 hw-detect: Detected module 'cmd64x' for 'IDE chipset support'
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] 3928064 512-byte hardware sectors (2011 MB)
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] Write Protect is off
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
Feb 18 10:46:15 kernel:  sda1
Feb 18 10:46:15 kernel: sd 3:0:0:0: [sda] Attached SCSI removable disk
Feb 18 10:46:15 kernel: sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
Feb 18 10:46:15 kernel: sd 2:0:0:0: [sdb] Write Protect is off
Feb 18 10:46:15 kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00
Feb 18 10:46:15 kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb 18 10:46:15 kernel: sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
Feb 18 10:46:15 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/cmd64x.ko 
Feb 18 10:46:15 kernel: sd 2:0:0:0: [sdb] Write Protect is off
Feb 18 10:46:15 kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 38 00 00
Feb 18 10:46:15 kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Feb 18 10:46:15 hw-detect: Detected module 'jmicron' for 'IDE chipset support'
Feb 18 10:46:15 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/jmicron.ko 
Feb 18 10:46:16 hw-detect: Detected module 'delkin_cb' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/delkin_cb.ko 
Feb 18 10:46:16 hw-detect: Detected module 'cs5535' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/cs5535.ko 
Feb 18 10:46:16 hw-detect: Detected module 'hpt34x' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/hpt34x.ko 
Feb 18 10:46:16 hw-detect: Detected module 'sc1200' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/sc1200.ko 
Feb 18 10:46:16 hw-detect: Detected module 'alim15x3' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/alim15x3.ko 
Feb 18 10:46:16 hw-detect: Detected module 'amd74xx' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/amd74xx.ko 
Feb 18 10:46:16 hw-detect: Detected module 'trm290' for 'IDE chipset support'
Feb 18 10:46:16 kernel:  sdb1
Feb 18 10:46:16 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/trm290.ko 
Feb 18 10:46:16 hw-detect: Detected module 'ns87415' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/ns87415.ko 
Feb 18 10:46:16 hw-detect: Detected module 'opti621' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/opti621.ko 
Feb 18 10:46:16 hw-detect: Detected module 'siimage' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/siimage.ko 
Feb 18 10:46:16 hw-detect: Detected module 'aec62xx' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/aec62xx.ko 
Feb 18 10:46:16 hw-detect: Detected module 'atiixp' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/atiixp.ko 
Feb 18 10:46:16 hw-detect: Detected module 'pdc202xx_new' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/pdc202xx_new.ko 
Feb 18 10:46:16 hw-detect: Detected module 'slc90e66' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/slc90e66.ko 
Feb 18 10:46:16 hw-detect: Detected module 'cs5530' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/cs5530.ko 
Feb 18 10:46:16 hw-detect: Detected module 'piix' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/piix.ko 
Feb 18 10:46:16 hw-detect: Detected module 'it821x' for 'IDE chipset support'
Feb 18 10:46:16 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/it821x.ko 
Feb 18 10:46:16 hw-detect: Detected module 'cs5520' for 'IDE chipset support'
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/cs5520.ko 
Feb 18 10:46:17 hw-detect: Detected module 'serverworks' for 'IDE chipset support'
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/serverworks.ko 
Feb 18 10:46:17 hw-detect: Detected module 'pdc202xx_old' for 'IDE chipset support'
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/pdc202xx_old.ko 
Feb 18 10:46:17 hw-detect: Detected module 'triflex' for 'IDE chipset support'
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/triflex.ko 
Feb 18 10:46:17 hw-detect: Detected module 'cy82c693' for 'IDE chipset support'
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/cy82c693.ko 
Feb 18 10:46:17 hw-detect: Detected module 'rz1000' for 'IDE chipset support'
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/rz1000.ko 
Feb 18 10:46:17 hw-detect: Detected module 'tc86c001' for 'IDE chipset support'
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/tc86c001.ko 
Feb 18 10:46:17 hw-detect: Detected module 'sis5513' for 'IDE chipset support'
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/pci/sis5513.ko 
Feb 18 10:46:17 hw-detect: Detected module 'ide-generic' for 'Linux IDE support'
Feb 18 10:46:17 kernel: Probing IDE interface ide1...
Feb 18 10:46:17 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/drivers/ide/ide-generic.ko 
Feb 18 10:46:18 hw-detect: Detected module 'isofs' for 'Linux ISO 9660 filesystem'
Feb 18 10:46:18 hw-detect: insmod /lib/modules/2.6.22-2-486/kernel/fs/isofs/isofs.ko 
Feb 18 10:46:18 apt-install: Queueing package udev for later installation
Feb 18 10:46:18 apt-install: Queueing package usbutils for later installation
Feb 18 10:46:18 apt-install: Queueing package acpi for later installation
Feb 18 10:46:18 apt-install: Queueing package acpid for later installation
Feb 18 10:46:18 apt-install: Queueing package libc6-i686 for later installation
Feb 18 10:46:18 hw-detect: Missing modules 'floppy (Linux Floppy), ide-mod (Linux IDE driver), ide-probe-mod (Linux IDE probe driver), ide-detect (Linux IDE detection), ide-floppy (Linux IDE floppy)
Feb 18 10:46:18 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Feb 18 10:46:18 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Feb 18 10:46:18 main-menu[1349]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Feb 18 10:46:18 main-menu[1349]: DEBUG: resolver (libbz2-1.0): package doesn't exist (ignored) 
Feb 18 10:46:18 main-menu[1349]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) 
Feb 18 10:46:18 main-menu[1349]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) 
Feb 18 10:46:18 main-menu[1349]: DEBUG: resolver (libslang2-udeb): package doesn't exist (ignored) 
Feb 18 10:46:18 main-menu[1349]: DEBUG: resolver (libstdc++6): package doesn't exist (ignored) 
Feb 18 10:46:18 main-menu[1349]: DEBUG: resolver (liblzo1): package doesn't exist (ignored) 
Feb 18 10:46:18 main-menu[1349]: INFO: Menu item 'partman-base' selected 
Feb 18 10:46:18 main-menu[1349]: INFO: Falling back to the package description for kernel-image-2.6.22-2-486-di 
Feb 18 10:46:18 main-menu[1349]: INFO: Falling back to the package description for kernel-image-2.6.22-2-486-di 
Feb 18 10:46:18 main-menu[1349]: INFO: Falling back to the package description for fat-modules-2.6.22-2-486-di 
Feb 18 10:46:18 main-menu[1349]: INFO: Falling back to the package description for fat-modules-2.6.22-2-486-di 
Feb 18 10:46:19 kernel: JFS: nTxBlock = 4035, nTxLock = 32281
Feb 18 10:46:19 kernel: SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
Feb 18 10:46:19 kernel: SGI XFS Quota Management subsystem
Feb 18 10:46:19 partman:   No matching physical volumes found
Feb 18 10:46:19 partman:   Reading all physical volumes.  This may take a while...
Feb 18 10:46:19 partman:   No volume groups found
Feb 18 10:46:21 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Feb 18 10:46:21 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Feb 18 10:46:22 kernel: kjournald starting.  Commit interval 5 seconds
Feb 18 10:46:22 kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Feb 18 10:46:22 kernel: EXT3 FS on sdb1, internal journal
Feb 18 10:46:22 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 18 10:46:22 main-menu[1349]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Feb 18 10:46:22 main-menu[1349]: DEBUG: resolver (libbz2-1.0): package doesn't exist (ignored) 
Feb 18 10:46:22 main-menu[1349]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) 
Feb 18 10:46:22 main-menu[1349]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) 
Feb 18 10:46:22 main-menu[1349]: DEBUG: resolver (libslang2-udeb): package doesn't exist (ignored) 
Feb 18 10:46:22 main-menu[1349]: DEBUG: resolver (libstdc++6): package doesn't exist (ignored) 
Feb 18 10:46:22 main-menu[1349]: DEBUG: resolver (liblzo1): package doesn't exist (ignored) 
Feb 18 10:46:22 main-menu[1349]: INFO: Menu item 'backharddi-udeb' selected 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for ext3-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for ext3-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for reiserfs-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for reiserfs-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for xfs-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for xfs-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for jfs-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for jfs-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for md-modules-2.6.22-2-486-di 
Feb 18 10:46:22 main-menu[1349]: INFO: Falling back to the package description for md-modules-2.6.22-2-486-di 
Feb 18 10:46:22 partman:   No matching physical volumes found
Feb 18 10:46:23 partman:   Reading all physical volumes.  This may take a while...
Feb 18 10:46:23 partman:   No volume groups found
Feb 18 10:46:28 kernel: sd 3:0:0:0: [sda] 3928064 512-byte hardware sectors (2011 MB)
Feb 18 10:46:28 kernel: sd 3:0:0:0: [sda] Write Protect is off
Feb 18 10:46:28 kernel: sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
Feb 18 10:46:28 kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
Feb 18 10:46:28 kernel:  sda1
Feb 18 10:46:28 kernel: sd 3:0:0:0: [sda] 3928064 512-byte hardware sectors (2011 MB)
Feb 18 10:46:28 kernel: sd 3:0:0:0: [sda] Write Protect is off
Feb 18 10:46:28 kernel: sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
Feb 18 10:46:28 kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
Feb 18 10:46:28 kernel:  sda1 sda2
Feb 18 10:46:29 partman:   No matching physical volumes found
Feb 18 10:46:29 partman:   Reading all physical volumes.  This may take a while...
Feb 18 10:46:29 partman:   No volume groups found
Feb 18 10:49:15 main-menu[1349]: WARNING **: Configuring 'backharddi-udeb' failed with error code 1 
Feb 18 10:49:15 main-menu[1349]: WARNING **: Menu item 'backharddi-udeb' failed. 
Feb 18 10:49:21 init: Starting pid 1273, console /dev/vc/2: '/bin/sh'
Tambien:

Código: Seleccionar todo

/bin/partman: *******************************************************
/lib/partman/init.d/01unsupported: *******************************************************
/lib/partman/init.d/30parted: *******************************************************
parted_server: ======= Starting the server
parted_server: main_loop: iteration 1
parted_server: Opening infifo
/lib/partman/init.d/30parted: IN: OPEN =dev=hda /dev/hda
parted_server: Read command: OPEN
parted_server: command_open()
parted_server: Request to open =dev=hda
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: OK


parted_server: Note =dev=hda as unchanged
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 2
parted_server: Opening infifo
/lib/partman/init.d/30parted: IN: OPEN =dev=sda /dev/sda
parted_server: Read command: OPEN
parted_server: command_open()
parted_server: Request to open =dev=sda
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: OK


parted_server: Note =dev=sda as unchanged
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 3
parted_server: Opening infifo
/lib/partman/init.d/30parted: IN: OPEN =dev=sdb /dev/sdb
parted_server: Read command: OPEN
parted_server: command_open()
parted_server: Request to open =dev=sdb
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: OK


parted_server: Note =dev=sdb as unchanged
parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 4
parted_server: Opening infifo
/lib/partman/init.d/31md-devices: *******************************************************
/lib/partman/init.d/35dump: *******************************************************
/lib/partman/init.d/35dump: IN: DUMP =dev=hda
parted_server: Read command: DUMP
parted_server: command_dump()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 5
parted_server: Opening infifo
Device: yes
Model: ST3160021A
Path: /dev/hda
Sector size: 512
Sectors: 312581808
Sectors/track: 63
Heads: 255
Cylinders: 19457
Partition table: yes
Type: msdos
Partitions: #	id	length	type	fs	path	name
(0,0,0)	(0,0,62)	-1	0-32255	32256	primary	label	/dev/hda-1	
(0,1,0)	(1913,254,62)	1	32256-15743185919	15743153664	primary	ntfs	/dev/hda1	
(1914,0,0)	(12112,254,62)	2	15743185920-99632816639	83889630720	primary	ntfs	/dev/hda2	
(12113,0,0)	(19456,254,62)	3	99632816640-160039272959	60406456320	primary	extended	/dev/hda3	
(12113,0,0)	(12113,0,62)	-1	99632816640-99632848895	32256	logical	label	/dev/hda-1	
(12113,1,0)	(14662,254,62)	5	99632848896-120607280639	20974431744	logical	fat32	/dev/hda5	
(14663,0,0)	(14663,0,62)	-1	120607280640-120607312895	32256	logical	label	/dev/hda-1	
(14663,1,0)	(14858,254,62)	6	120607312896-122219435519	1612122624	logical	linux-swap	/dev/hda6	
(14859,0,0)	(14859,0,62)	-1	122219435520-122219467775	32256	logical	label	/dev/hda-1	
(14859,1,0)	(19456,254,62)	7	122219467776-160039272959	37819805184	logical	ext3	/dev/hda7	
(19457,0,0)	(19457,80,62)	-1	160039272960-160041885695	2612736	primary	label	/dev/hda-1	
Dump finished.
/lib/partman/init.d/35dump: IN: DUMP =dev=sda
parted_server: Read command: DUMP
parted_server: command_dump()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 6
parted_server: Opening infifo
Device: yes
Model: Kingston DataTraveler 2.0
Path: /dev/sda
Sector size: 512
Sectors: 3928064
Sectors/track: 63
Heads: 64
Cylinders: 974
Partition table: yes
Type: msdos
Partitions: #	id	length	type	fs	path	name
(0,0,0)	(0,0,62)	-1	0-32255	32256	primary	label	/dev/sda-1	
(0,1,0)	(0,3,58)	-1	32256-126975	94720	pri/log	free	/dev/sda-1	
(0,3,59)	(974,14,13)	1	126976-2011168767	2011041792	primary	fat16	/dev/sda1	
Dump finished.
/lib/partman/init.d/35dump: IN: DUMP =dev=sdb
parted_server: Read command: DUMP
parted_server: command_dump()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 7
parted_server: Opening infifo
Device: yes
Model: Hitachi HTS541616J9AT00
Path: /dev/sdb
Sector size: 512
Sectors: 312581808
Sectors/track: 63
Heads: 255
Cylinders: 19457
Partition table: yes
Type: msdos
Partitions: #	id	length	type	fs	path	name
(0,0,0)	(0,0,62)	-1	0-32255	32256	primary	label	/dev/sdb-1	
(0,1,0)	(19456,254,62)	1	32256-160039272959	160039240704	primary	ext3	/dev/sdb1	
(19457,0,0)	(19457,80,62)	-1	160039272960-160041885695	2612736	primary	label	/dev/sdb-1	
Dump finished.
/lib/partman/init.d/50lvm: *******************************************************
/lib/partman/init.d/50lvm: IN: PARTITIONS =dev=hda
parted_server: Read command: PARTITIONS
parted_server: command_partitions()
parted_server: Opening outfifo
parted_server: OUT: OK


parted_server: OUT: 1	32256-15743185919	15743153664	primary	ntfs	/dev/hda1	


parted_server: OUT: 2	15743185920-99632816639	83889630720	primary	ntfs	/dev/hda2	


parted_server: OUT: 5	99632848896-120607280639	20974431744	logical	fat32	/dev/hda5	


parted_server: OUT: 6	120607312896-122219435519	1612122624	logical	linux-swap	/dev/hda6	


parted_server: OUT: 7	122219467776-160039272959	37819805184	logical	ext3	/dev/hda7	


parted_server: Partitions printed
parted_server: OUT: 


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 8
parted_server: Opening infifo
/lib/partman/init.d/50lvm: IN: GET_FLAGS =dev=hda 32256-15743185919
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(32256-15743185919)
parted_server: Partition found (32256-15743185919)
parted_server: OUT: OK


parted_server: OUT: boot


parted_server: OUT: 


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 9
parted_server: Opening infifo
/lib/partman/init.d/50lvm: IN: GET_FLAGS =dev=hda 15743185920-99632816639
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(15743185920-99632816639)
parted_server: Partition found (15743185920-99632816639)
parted_server: OUT: OK


parted_server: OUT: 


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 10
parted_server: Opening infifo
/lib/partman/init.d/50lvm: IN: GET_FLAGS =dev=hda 99632848896-120607280639
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(99632848896-120607280639)
parted_server: Partition found (99632848896-120607280639)
parted_server: OUT: OK


parted_server: OUT: 


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 11
parted_server: Opening infifo
/lib/partman/init.d/50lvm: IN: GET_FLAGS =dev=hda 120607312896-122219435519
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(120607312896-122219435519)
parted_server: Partition found (120607312896-122219435519)
parted_server: OUT: OK


parted_server: OUT: 


parted_server: Closing infifo and outfifo
parted_server: main_loop: iteration 12
parted_server: Opening infifo
/lib/partman/init.d/50lvm: IN: GET_FLAGS =dev=hda 122219467776-160039272959
parted_server: Read command: GET_FLAGS
parted_server: command_get_flags()
parted_server: Opening outfifo
parted_server: partition_with_id(122219467776-160039272959)
parted_server: Parti
Todos los horarios son UTC+02:00
Página 1 de 1

Desarrollado por phpBB® Forum Software © phpBB Limited

Traducción al español por phpBB España