USB en Max 1.2
Moderadores: daniel.esteban, victor.armendariz, ruben.garcia45, irene.olalla, dgonzalezarroyo
-
des_fbombin
- Mensajes: 4
- Registrado: 21 Feb 2008, 14:56
No consigo leer memorias USB en Max 1.2 . ¿me puede ayudar alguien?. Gracias
-
des_grupomax
- Mensajes: 76
- Registrado: 07 Jun 2005, 13:55
- Contactar:
Buff, si casi ya no nos acordamos de esa versión.
En serio intenta hacer lo siguiente:
- Pincha el pendrive
- En el escritorio, botón derecho y pulsa Terminal. sale una pantalla negra.
- Teclea:
Saldrá alguna información que debes pegar en el próximo mensaje al foro
En serio intenta hacer lo siguiente:
- Pincha el pendrive
- En el escritorio, botón derecho y pulsa Terminal. sale una pantalla negra.
- Teclea:
Código: Seleccionar todo
tail dmesgUn saludo
Grupo de trabajo MAX
Grupo de trabajo MAX
-
des_fbombin
- Mensajes: 4
- Registrado: 21 Feb 2008, 14:56
Gracias por la atencion.
He escrito tail dmesg y me dice: comando no exixte.
He escrito dmesg y me da la siguiente charla:
[alumnos]alumnos dmesg
Linux version 2.4.28-pre3 (root@titan) (gcc version 2.95.4 20011002 (Debian prerelease)) #11 SMP Thu Nov 4 23:28:02 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
256MB LOWMEM available.
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 98 and too old
You can enable it with acpi=force
Kernel command line: auto BOOT_IMAGE=MAX1.2 ro root=301 ramdisk_size=250000 init=/etc/init lang=es apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi nomce quiet CONSOLE=/dev/tty2 console=/dev/tty2
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 350.803 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 699.59 BogoMIPS
Memory: 255704k/262144k available (1680k kernel code, 6052k reserved, 669k data, 412k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU0: Intel Pentium II (Deschutes) stepping 02
per-CPU timeslice cutoff: 1463.72 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 350.8071 MHz.
..... host bus clock speed is 100.2304 MHz.
cpu: 0, clocks: 1002304, slice: 501152
CPU0<T0:1002304,T1:501152,D:0,S:501152,C:1002304>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
FBCON: fbcon_progress called
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
FBCON: fbcon_progress called
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
FBCON: fbcon_progress called
pty: 256 Unix98 ptys configured
FBCON: fbcon_progress called
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
FBCON: fbcon_progress called
FBCON: fbcon_progress called
RAMDISK driver initialized: 16 RAM disks of 250000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG SW0434A (4.3GB), ATA DISK drive
hdb: CREATIVE CD5233E, ATAPI CD/DVD-ROM drive
blk: queue c04042c0, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 8406720 sectors (4304 MB) w/493KiB Cache, CHS=523/255/63, UDMA(33)
ide-cd: passing drive hdb to ide-scsi emulation.
ide-cd: passing drive hdc to ide-scsi emulation.
hdb: attached ide-scsi driver.
hdc: attached ide-scsi driver.
Partition check:
hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: CREATIVE Model: CD5233E Rev: 2.02
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVDRAM GSA-4167B Rev: DL10
Type: CD-ROM ANSI SCSI revision: 02
libata version 1.02 loaded.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 0x/56x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Fusion MPT base driver 2.05.16
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.16
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FBCON: fbcon_progress called
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
FBCON: fbcon_progress called
Freeing unused kernel memory: 412k freed
Warning: unable to open an initial console.
FBCON: fbcon_progress called
FBCON: created proc entry
FBCON: fbcon_progress called
Real Time Clock Driver v1.10f
Adding Swap: 722916k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
FBCON: fbcon_progress called
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
FBCON: fbcon_progress called
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:09:00 Nov 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:09:00 Nov 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
FBCON: fbcon_progress called
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,EPP]
PCI: Found IRQ 10 for device 00:13.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:13.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.18-ac
00:01:02:b5:cc:38, IRQ 10
product code 4552 rev 00.13 date 09-06-00
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
00:13.0: scatter/gather enabled. h/w checksums enabled
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: Creative SB AWE64 PnP detected
sb: ISAPnP reports 'Creative SB AWE64 PnP' at i/o 0x220, irq 5, dma 1, 5
SB 4.16 detected OK (220)
sb: 1 Soundblaster PnP card(s) found.
ISAPnP reports AWE64 WaveTable at i/o 0x620
<SoundBlaster EMU8000 (RAM512k)>
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
parport0: PC-style at 0x378 [PCSPP,EPP]
lp0: using parport0 (polling).
lp0: console ready
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
FBCON: fbcon_progress called
end_request: I/O error, dev 02:00 (floppy), sector 0
sr0: CDROM not ready. Make sure there is a disc in the drive.
cdrom: open failed.
cdrom: open failed.
[alumnos]alumnos
Ahi queda eso y gracias
He escrito tail dmesg y me dice: comando no exixte.
He escrito dmesg y me da la siguiente charla:
[alumnos]alumnos dmesg
Linux version 2.4.28-pre3 (root@titan) (gcc version 2.95.4 20011002 (Debian prerelease)) #11 SMP Thu Nov 4 23:28:02 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
256MB LOWMEM available.
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 98 and too old
You can enable it with acpi=force
Kernel command line: auto BOOT_IMAGE=MAX1.2 ro root=301 ramdisk_size=250000 init=/etc/init lang=es apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi nomce quiet CONSOLE=/dev/tty2 console=/dev/tty2
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 350.803 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 699.59 BogoMIPS
Memory: 255704k/262144k available (1680k kernel code, 6052k reserved, 669k data, 412k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU0: Intel Pentium II (Deschutes) stepping 02
per-CPU timeslice cutoff: 1463.72 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 350.8071 MHz.
..... host bus clock speed is 100.2304 MHz.
cpu: 0, clocks: 1002304, slice: 501152
CPU0<T0:1002304,T1:501152,D:0,S:501152,C:1002304>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
FBCON: fbcon_progress called
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
FBCON: fbcon_progress called
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
FBCON: fbcon_progress called
pty: 256 Unix98 ptys configured
FBCON: fbcon_progress called
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
FBCON: fbcon_progress called
FBCON: fbcon_progress called
RAMDISK driver initialized: 16 RAM disks of 250000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG SW0434A (4.3GB), ATA DISK drive
hdb: CREATIVE CD5233E, ATAPI CD/DVD-ROM drive
blk: queue c04042c0, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 8406720 sectors (4304 MB) w/493KiB Cache, CHS=523/255/63, UDMA(33)
ide-cd: passing drive hdb to ide-scsi emulation.
ide-cd: passing drive hdc to ide-scsi emulation.
hdb: attached ide-scsi driver.
hdc: attached ide-scsi driver.
Partition check:
hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: CREATIVE Model: CD5233E Rev: 2.02
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HL-DT-ST Model: DVDRAM GSA-4167B Rev: DL10
Type: CD-ROM ANSI SCSI revision: 02
libata version 1.02 loaded.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 0x/56x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Fusion MPT base driver 2.05.16
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.16
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FBCON: fbcon_progress called
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
FBCON: fbcon_progress called
Freeing unused kernel memory: 412k freed
Warning: unable to open an initial console.
FBCON: fbcon_progress called
FBCON: created proc entry
FBCON: fbcon_progress called
Real Time Clock Driver v1.10f
Adding Swap: 722916k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
FBCON: fbcon_progress called
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
FBCON: fbcon_progress called
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:09:00 Nov 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:09:00 Nov 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
FBCON: fbcon_progress called
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,EPP]
PCI: Found IRQ 10 for device 00:13.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:13.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.18-ac
00:01:02:b5:cc:38, IRQ 10
product code 4552 rev 00.13 date 09-06-00
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
00:13.0: scatter/gather enabled. h/w checksums enabled
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: Creative SB AWE64 PnP detected
sb: ISAPnP reports 'Creative SB AWE64 PnP' at i/o 0x220, irq 5, dma 1, 5
SB 4.16 detected OK (220)
sb: 1 Soundblaster PnP card(s) found.
ISAPnP reports AWE64 WaveTable at i/o 0x620
<SoundBlaster EMU8000 (RAM512k)>
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
parport0: PC-style at 0x378 [PCSPP,EPP]
lp0: using parport0 (polling).
lp0: console ready
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
FBCON: fbcon_progress called
end_request: I/O error, dev 02:00 (floppy), sector 0
sr0: CDROM not ready. Make sure there is a disc in the drive.
cdrom: open failed.
cdrom: open failed.
[alumnos]alumnos
Ahi queda eso y gracias
-
des_grupomax
- Mensajes: 76
- Registrado: 07 Jun 2005, 13:55
- Contactar:
Lo del tail es error mio 
Lo importante son las últimas lineas.
- Veo que entraste como alumno, hazlo como madrid o knoppix, ya no recuerdo en esa versión. Más probable knoppix.
- Sin hacer nada pincha el pendrive y espera 3 minutos
- Abre el terminal y vuelve a mandar la salida de dmesg
Lo importante son las últimas lineas.
- Veo que entraste como alumno, hazlo como madrid o knoppix, ya no recuerdo en esa versión. Más probable knoppix.
- Sin hacer nada pincha el pendrive y espera 3 minutos
- Abre el terminal y vuelve a mandar la salida de dmesg
Un saludo
Grupo de trabajo MAX
Grupo de trabajo MAX
-
des_fbombin
- Mensajes: 4
- Registrado: 21 Feb 2008, 14:56
Estimado Grupomax: 
He ejecutado dmesg desde el usuario madrid ya que desde knoppix me da varios mensajes de error y esto es lo que me da:
[madrid]madrid dmesg
Linux version 2.4.28-pre3 (root@titan) (gcc version 2.95.4 20011002 (Debian prerelease)) #11 SMP Thu Nov 4 23:28:02 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
256MB LOWMEM available.
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 98 and too old
You can enable it with acpi=force
Kernel command line: auto BOOT_IMAGE=MAX1.2 ro root=301 ramdisk_size=250000 init=/etc/init lang=es apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi nomce quiet CONSOLE=/dev/tty2 console=/dev/tty2
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 350.802 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 699.59 BogoMIPS
Memory: 255704k/262144k available (1680k kernel code, 6052k reserved, 669k data, 412k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU0: Intel Pentium II (Deschutes) stepping 01
per-CPU timeslice cutoff: 1463.72 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 350.8153 MHz.
..... host bus clock speed is 100.2328 MHz.
cpu: 0, clocks: 1002328, slice: 501164
CPU0<T0:1002320,T1:501152,D:4,S:501164,C:1002328>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
FBCON: fbcon_progress called
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
FBCON: fbcon_progress called
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
FBCON: fbcon_progress called
pty: 256 Unix98 ptys configured
FBCON: fbcon_progress called
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
FBCON: fbcon_progress called
FBCON: fbcon_progress called
RAMDISK driver initialized: 16 RAM disks of 250000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG SW0434A (4.3GB), ATA DISK drive
blk: queue c04042c0, I/O limit 4095Mb (mask 0xffffffff)
hdc: LG DVD-ROM DRD-8120B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 8406720 sectors (4304 MB) w/493KiB Cache, CHS=523/255/63, UDMA(33)
ide-cd: passing drive hdc to ide-scsi emulation.
hdc: attached ide-scsi driver.
Partition check:
hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LG Model: DVD-ROM DRD8120B Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
libata version 1.02 loaded.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Fusion MPT base driver 2.05.16
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.16
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FBCON: fbcon_progress called
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(recovery.c, 256): journal_recover: JBD: recovery, exit status 0, recovered transactions 133339 to 133563
(recovery.c, 258): journal_recover: JBD: Replayed 3082 and revoked 9/27 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
FBCON: fbcon_progress called
Freeing unused kernel memory: 412k freed
Warning: unable to open an initial console.
FBCON: fbcon_progress called
FBCON: created proc entry
FBCON: fbcon_progress called
Real Time Clock Driver v1.10f
Adding Swap: 618492k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
FBCON: fbcon_progress called
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
FBCON: fbcon_progress called
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:09:00 Nov 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:09:00 Nov 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
FBCON: fbcon_progress called
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,EPP]
PCI: Found IRQ 11 for device 00:14.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:14.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.18-ac
00:01:02:b6:56:6d, IRQ 11
product code 4552 rev 00.13 date 09-11-00
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
00:14.0: scatter/gather enabled. h/w checksums enabled
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: Creative SB AWE64 PnP detected
sb: ISAPnP reports 'Creative SB AWE64 PnP' at i/o 0x220, irq 5, dma 1, 5
SB 4.16 detected OK (220)
sb: 1 Soundblaster PnP card(s) found.
ISAPnP reports AWE64 WaveTable at i/o 0x620
<SoundBlaster EMU8000 (RAM512k)>
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
parport0: PC-style at 0x378 [PCSPP,EPP]
lp0: using parport0 (polling).
lp0: console ready
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
FBCON: fbcon_progress called
end_request: I/O error, dev 02:00 (floppy), sector 0
cdrom: open failed.
Un saludo Gracias
He ejecutado dmesg desde el usuario madrid ya que desde knoppix me da varios mensajes de error y esto es lo que me da:
[madrid]madrid dmesg
Linux version 2.4.28-pre3 (root@titan) (gcc version 2.95.4 20011002 (Debian prerelease)) #11 SMP Thu Nov 4 23:28:02 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
256MB LOWMEM available.
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 98 and too old
You can enable it with acpi=force
Kernel command line: auto BOOT_IMAGE=MAX1.2 ro root=301 ramdisk_size=250000 init=/etc/init lang=es apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi hdh=scsi nomce quiet CONSOLE=/dev/tty2 console=/dev/tty2
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 350.802 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 699.59 BogoMIPS
Memory: 255704k/262144k available (1680k kernel code, 6052k reserved, 669k data, 412k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU0: Intel Pentium II (Deschutes) stepping 01
per-CPU timeslice cutoff: 1463.72 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 350.8153 MHz.
..... host bus clock speed is 100.2328 MHz.
cpu: 0, clocks: 1002328, slice: 501164
CPU0<T0:1002320,T1:501152,D:4,S:501164,C:1002328>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
FBCON: fbcon_progress called
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
FBCON: fbcon_progress called
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
FBCON: fbcon_progress called
pty: 256 Unix98 ptys configured
FBCON: fbcon_progress called
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
FBCON: fbcon_progress called
FBCON: fbcon_progress called
RAMDISK driver initialized: 16 RAM disks of 250000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG SW0434A (4.3GB), ATA DISK drive
blk: queue c04042c0, I/O limit 4095Mb (mask 0xffffffff)
hdc: LG DVD-ROM DRD-8120B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 8406720 sectors (4304 MB) w/493KiB Cache, CHS=523/255/63, UDMA(33)
ide-cd: passing drive hdc to ide-scsi emulation.
hdc: attached ide-scsi driver.
Partition check:
hda: hda1 hda2
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LG Model: DVD-ROM DRD8120B Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
libata version 1.02 loaded.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Fusion MPT base driver 2.05.16
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.16
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FBCON: fbcon_progress called
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(recovery.c, 256): journal_recover: JBD: recovery, exit status 0, recovered transactions 133339 to 133563
(recovery.c, 258): journal_recover: JBD: Replayed 3082 and revoked 9/27 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
FBCON: fbcon_progress called
Freeing unused kernel memory: 412k freed
Warning: unable to open an initial console.
FBCON: fbcon_progress called
FBCON: created proc entry
FBCON: fbcon_progress called
Real Time Clock Driver v1.10f
Adding Swap: 618492k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
FBCON: fbcon_progress called
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
FBCON: fbcon_progress called
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:09:00 Nov 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:09:00 Nov 5 2004
usb-uhci.c: High bandwidth mode enabled
PCI: No IRQ known for interrupt pin D of device 00:07.2. Please try using pci=biosirq.
usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings!
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
FBCON: fbcon_progress called
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,EPP]
PCI: Found IRQ 11 for device 00:14.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:14.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.18-ac
00:01:02:b6:56:6d, IRQ 11
product code 4552 rev 00.13 date 09-11-00
Internal config register is 1800000, transceivers 0xa.
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
00:14.0: scatter/gather enabled. h/w checksums enabled
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: Creative SB AWE64 PnP detected
sb: ISAPnP reports 'Creative SB AWE64 PnP' at i/o 0x220, irq 5, dma 1, 5
SB 4.16 detected OK (220)
sb: 1 Soundblaster PnP card(s) found.
ISAPnP reports AWE64 WaveTable at i/o 0x620
<SoundBlaster EMU8000 (RAM512k)>
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
FBCON: fbcon_progress called
parport0: PC-style at 0x378 [PCSPP,EPP]
lp0: using parport0 (polling).
lp0: console ready
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
FBCON: fbcon_progress called
end_request: I/O error, dev 02:00 (floppy), sector 0
cdrom: open failed.
Un saludo Gracias